Re: [Emc-users] G-Code issue with IJ

[John Dammeyer]

> -----Original Message-----
> From: Ken Strauss [mailto:ken.stra...@gmail.com]


> My G30 is setup to move in Z only.

I'm a bit confused here then.
http://linuxcnc.org/docs/2.6/html/gcode/gcode.html#sec:G30-G30_1


This goes at max speed to Z 0.5 which makes sense.
G0 Z 0.5000 (Z Clear)

This part is also clear.
M9 (Coolant OFF)
M5 (Spindle OFF)

This moves only the Z axis?  Shouldn't it also go to the preset locations after 
it goes to Z0.5?
G30 Z 0.5 (Go in Z only to preset G30 location)

And now it heads to all the preset locations which would then move Z back to 
the preset location unless that is 0.5 in which case there is no movement.
G30 (Go to preset G30 location)

I'll try running yours again after I do a G30.1 to a known place a bit closer 
than machine 0,0,0.

John




_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users