On Tue, 15 Dec 2020 at 19:04, John Dammeyer <jo...@autoartisans.com> wrote:
> Enter instead G01 X1.0 F4 M3 S1000 and spindle doesn't stop but accelerates > up to 1000 RPM. The first time I tried it, I got what I expected, then I tried again and now it gives the wrong behaviour every time. So at least I have a system to try debugging on. > BTW, using a PC and Axis 2.7.14 (still with the MESA) it exhibits the same > issue. Which suggests that it isn't related to the mult-spindle changes, as I assumed. > So it looks like although the AXIS Spindle ON should also set the M3 it > doesn't? I am not sure. You will note that the axis spindle-on button stays depressed, and you need to stop to get Axis back in synch. You don't need the move. If you set the spindle to 500 in the GUI then issue "S1000" in the MDI window the spindle stops. I don't think that I have seen this with Touchy (the other UII use) but I need to check. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1912 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
