otrd., 2021. g. 26. janv., plkst. 19:26 — lietotājs andy pugh (<bodge...@gmail.com>) rakstīja: > > You have two internally toothed gears and a double-height flex-spline. > The gears have 202 and 200 teeth, the flex-spline has 200. > That means that the flex-spline is static relative to the 200 tooth > gear, but moves the 202 tooth gear.
My apologies if I missed it explained somewhere in this thread, but I have a question about the design of those two gears with internal teeth: If I understand correctly, pitch diameter is equal for both gears. But the number of teeth is different. IMHO it should affect the pitch of the teeth. Is that correct? Does it mean that there are 2 different rows of teeth on flexspline - for each of the internal teeth gears? There was a suggestion to use timing belt as flexspline, so that would mean that teeth pitch is equal on both internal teeth gears, but then I do not understand, how to get equal pitch diameter with different number of teeth... Viesturs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
