Forgot to mention I had tried that. I have it set to AXYZ. The tool images starts with the flat of the tool cone facing away from me. I can now also see the A change briefly to say 20 and then back to zero, probably due to the G92.
But it's still drawing the image as if it's in one spot. Which in effect it is since the rotary axis, in line with the X axis is turning so the XYZ remain the same other than Z moving into the work to cut and out to retract. X moves along the graduations and AX move to draw the letters. So something else in the INI or HAL file is still confusing the system. John > From: Sam Sokolik [mailto:samco...@gmail.com] > > You need in the display section of the INI file > > GEOMETRY = AXYZ > > On Wed, Mar 31, 2021, 5:00 PM John Dammeyer <jo...@autoartisans.com> wrote: > > > > > > From: Sam Sokolik [mailto:samco...@gmail.com] > > > > > http://electronicsam.com/images/greenmachine/Screenshot_2021-03-30_18-00-14.png > > > > > Alright, I'm confused. > > I've got the G-Code turning the 4th axis A. The X moves back and forth > > for carving the lines as does A when letters are carved. At 90 degrees the > > conical tool image on the AXIS screen has rotated 90 degrees but the > > location of A is still zero on the screen as well as I don't get that > > circular image that Sam has. > > http://www.autoartisans.com/mill/Screenshot_2021-03-31_14-22-48.png > > > > So physically the Axis is turning. But it doesn't seem to be represented > > on the screen. What could be missing? Something in the HAL or INI file? > > > > Thanks > > John > > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
