Scott, There are only a couple of differences. I have ARCDIVISION=64 GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in I've also added a panel but that's outside the display screen. PYVCP = pyvcp-panel.xml
and I'm missing CYCLE_TIME = 100 Here's mine. [DISPLAY] DISPLAY = axis POSITION_OFFSET = RELATIVE POSITION_FEEDBACK = ACTUAL MAX_FEED_OVERRIDE = 1.500000 MAX_SPINDLE_OVERRIDE = 1.000000 MIN_SPINDLE_OVERRIDE = 0.500000 INTRO_GRAPHIC = linuxcnc.gif INTRO_TIME = 5 PROGRAM_PREFIX = /home/john/linuxcnc/nc_files INCREMENTS = .1in .05in .01in .005in .001in .0005in .0001in ARCDIVISION = 64 GRIDS = 10mm 20mm 50mm 100mm 1in 2in 5in 10in POSITION_FEEDBACK = ACTUAL DEFAULT_LINEAR_VELOCITY = 1.00 MIN_LINEAR_VELOCITY = 0 MAX_LINEAR_VELOCITY = 3.0 DEFAULT_ANGULAR_VELOCITY = 90.00 MIN_ANGULAR_VELOCITY = 0 MAX_ANGULAR_VELOCITY = 180.00 EDITOR = mousepad GEOMETRY = AXYZ PYVCP = pyvcp-panel.xml > -----Original Message----- > From: Scott Harwell via Emc-users [mailto:emc-users@lists.sourceforge.net] > Sent: March-31-21 6:24 PM > To: Enhanced Machine Controller (EMC) > Cc: Scott Harwell > Subject: Re: [Emc-users] Rotary axis preview (in axis interface) > > John, > I have it almost working. The tool still tilts, but it will display the ring, > and you can see what is happening. > From my INI > > [DISPLAY] > DISPLAY = axis > POSITION_OFFSET = RELATIVE > POSITION_FEEDBACK = ACTUAL > MAX_FEED_OVERRIDE = 2.000000 > MAX_SPINDLE_OVERRIDE = 1.500000 > MIN_SPINDLE_OVERRIDE = 0.500000 > INTRO_GRAPHIC = linuxcnc.gif > INTRO_TIME = 5 > PROGRAM_PREFIX = /home/sh/linuxcnc/nc_files > INCREMENTS = .1in .05in .01in .005in .001in .0005in .0001in > POSITION_FEEDBACK = ACTUAL > DEFAULT_LINEAR_VELOCITY = 0.250000 > MAX_LINEAR_VELOCITY = 1.000000 > MIN_LINEAR_VELOCITY = 0.016670 > DEFAULT_ANGULAR_VELOCITY = 12.000000 > MAX_ANGULAR_VELOCITY = 180.000000 > MIN_ANGULAR_VELOCITY = 1.666667 > EDITOR = gedit > GEOMETRY = aXYZ > CYCLE_TIME = 100 > Excuse the speeds this is from my prototype system, no machine. > Scott > > > On Wednesday, March 31, 2021, 5:19:05 PM CDT, John Dammeyer > <jo...@autoartisans.com> wrote: > > Forgot to mention I had tried that.� I have it set to AXYZ.� The tool images > starts with the flat of the tool cone facing away from me.� > I can now also see the A change briefly to say 20 and then back to zero, > probably due to the G92. > > But it's still drawing the image as if it's in one spot.� Which in effect it > is since the rotary axis, in line with the X axis is turning so the > XYZ remain the same other than Z moving into the work to cut and out to > retract.� X moves along the graduations and AX move to > draw the letters. > > So something else in the INI or HAL file is still confusing the system. > > John > > From: Sam Sokolik [mailto:samco...@gmail.com] > > > > You need in the display section of the INI file > > > > GEOMETRY = AXYZ > > > > On Wed, Mar 31, 2021, 5:00 PM John Dammeyer <jo...@autoartisans.com> wrote: > > > > > > > > > From: Sam Sokolik [mailto:samco...@gmail.com] > > > > > > > http://electronicsam.com/images/greenmachine/Screenshot_2021-03-30_18-00-14.png > > > > > > > Alright, I'm confused. > > > I've got the G-Code turning the 4th axis A.� The X moves back and forth > > > for carving the lines as does A when letters are carved.� At 90 degrees > > > the > > > conical tool image on the AXIS screen has rotated 90 degrees but the > > > location of A is still zero on the screen as well as I don't get that > > > circular image that Sam has. > > > http://www.autoartisans.com/mill/Screenshot_2021-03-31_14-22-48.png > > > > > > So physically the Axis is turning.� But it doesn't seem to be represented > > > on the screen.� What could be missing?� Something in the HAL or INI file? > > > > > > Thanks > > > John > > > > > > > > > > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
