On Sun, 4 Apr 2021, Feral Engineer wrote:
Date: Sun, 4 Apr 2021 10:04:29 -0400
From: Feral Engineer <theferalengin...@gmail.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] [Emc-developers] Home_use_index issue revisited
But home should be referenced from the switch and reset with the proxy as
the index pulse. I don't see this as normal behavior. Homing against the
switch then moving to some arbitrary position defeats the purpose of having
a homing sequence. If you watch my video, "zero" is purely dependent on
where the machine is when you start the software. All of my ini settings
are zero. Between the two reference returns I show in my video, nothing
changed but the position the machine was in when the software was started.
This behavior is not present when only using the mechanical switch.
Phil T.
The Feral Engineer
I would expect this behaviour if you are using the stepgen feedback
since the stepgen feedback is not cleared by index
Check out my LinuxCNC tutorials, machine builds and other antics at
www.youtube.com/c/theferalengineer
On Sun, Apr 4, 2021, 4:45 AM Frank Tkalcevic <fr...@franksworkshop.com.au>
wrote:
What I'm seeing (and I'm not a linuxcnc expert) looks correct. After the
homing sequence it jumps to HOME. This is documented here (0.1.3.7)
http://linuxcnc.org/docs/2.4/html/config_ini_homing.html
-----Original Message-----
From: Feral Engineer [mailto:theferalengin...@gmail.com]
Sent: Sunday, 4 April 2021 1:58 PM
To: EMC developers; Enhanced Machine Controller (EMC)
Subject: [Emc-developers] Home_use_index issue revisited
Finally getting back around to messing with this mechanical/prox home
issue. See attached video link. I show what it is doing and explain what I
want it to do.
Thanks in advance for your help
https://youtu.be/XVz6v2YNXJQ
Phil T.
The Feral Engineer
Check out my LinuxCNC tutorials, machine builds and other antics at
www.youtube.com/c/theferalengineer
_______________________________________________
Emc-developers mailing list
emc-develop...@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
