the skimmer was a disk skimmer On Fri, Nov 5, 2021 at 3:14 PM John Dammeyer <jo...@autoartisans.com> wrote:
> Hi Stuart, > > From: Stuart Stevenson [mailto:stus...@gmail.com] > > > > Hangstefer's coolant concentrate will stay in the sump indefinitely. > Which particular one? > http://www.hangsterfers.com/products/coolant-concentrates/ > > > I had some in a sump (150 gallon sump) for over 4 years without daily > use > > and never any attention more than adding concentrate as necessary to > > maintain level. Never an odor any time I started the machine. It did NOT > > stink and never molded. I had a skimmer on the sump that ran almost all > the > > time but the sump was partitioned and two of the three sections had an > oil > > cover on them. Still not a single problem with coolant in over four > years. > > > > HTH > > Stuart > > > > Is that a belt skimmer or a disk skimmer. I think if I build my own belt > skimmer I can get it to fit in the reservoir through an access hole. > > If I was going to build a belt skimmer the belt material would probably be > the difficult item to find. The rest of the control for motor etc. either > via ModBus or CANopen since the reaction speed isn't super critical. > > Thanks > John > > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
