Busy 3D printing a small box to hold my interface board to the spindle and probe connector. Then I'll do some more testing.
It appears to be fairly repeatable. I haven't figured out how to set the Z zero to the top of the material. I can click on the icon button and it goes down, finds it and then moves up. But it's at a random Z value. What I'd really like is that it detects the top, sets the Z axis to zero and then moves up the preprogrammed amount. In the same way the screen positions the probe above the 0 point for say X and Y but nothing else is changed. One still has to go to the main screen and zero both X and Y. Or else I'm using it wrong... Probably... John > -----Original Message----- > From: andrew beck [mailto:[email protected]] > Sent: November-11-21 7:37 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Touch Probe > > Awesome > > I want one ???? > > On Fri, 12 Nov 2021, 16:34 John Dammeyer, <[email protected]> wrote: > > > Wires have been run. Been a bit difficult to get it working as my machine > > is still imperial and most of the Probe Screen is targeted to metric. Add > > that you need to type Enter to make a parameter change permanent and you > > have no idea which field is being changed the point above the work to put > > the probe for measuring is a bit obscure. > > Finally figured it out and made this short video. > > https://youtu.be/y1CBt3HYnvU > > > > John > > > > > -----Original Message----- > > > From: John Dammeyer [mailto:[email protected]] > > > Sent: November-10-21 12:50 PM > > > To: Enhanced Machine Controller (EMC) > > > Subject: [Emc-users] Touch Probe > > > > > > My PR series touch probe arrived from Belarus today (www.vers.by ). > > Quality looks really nice. Now to decide which input to use to > > > connect it to LCNC and run the wires. I already have the probe screen > > panel installed. > > > > > > More when it's been tested. > > > > > > John > > > > > > > > > "ELS! Nothing else works as well for your Lathe" > > > Automation Artisans Inc. > > > www dot autoartisans dot com > > > > > > > > > _______________________________________________ > > > Emc-users mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
