Are you using their recommended probe screen? I'm using an older version
of that probe screen and have had a few issues with it. If a probe fails
it can store up moves and execute them next time you try probing. If a
probe fails press stop a few times to clear the moves. I got caught out
by this a while back and it ended up repeatedly pounding my probe into
the work. The stylus hit with so much force it pretty much exploded and
parts hit my 12' ceiling! I have to take my hat off to Renishaw. They
may be painfully expensive but their probes can take a beating. After
replacing the stylus and re calibrating it was good to go.
Les
On 12/11/2021 03:30, John Dammeyer wrote:
Wires have been run. Been a bit difficult to get it working as my machine is
still imperial and most of the Probe Screen is targeted to metric. Add that
you need to type Enter to make a parameter change permanent and you have no
idea which field is being changed the point above the work to put the probe for
measuring is a bit obscure.
Finally figured it out and made this short video.
https://youtu.be/y1CBt3HYnvU
John
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users