Yeah I have been trying to buy one for ages but here in New Zealand the credit cards won't allow me to buy from beluras as there are sanctions against it.
On Fri, 12 Nov 2021, 16:56 John Dammeyer, <[email protected]> wrote: > Busy 3D printing a small box to hold my interface board to the spindle and > probe connector. Then I'll do some more testing. > > It appears to be fairly repeatable. I haven't figured out how to set the > Z zero to the top of the material. I can click on the icon button and it > goes down, finds it and then moves up. But it's at a random Z value. What > I'd really like is that it detects the top, sets the Z axis to zero and > then moves up the preprogrammed amount. > In the same way the screen positions the probe above the 0 point for say X > and Y but nothing else is changed. One still has to go to the main screen > and zero both X and Y. > > Or else I'm using it wrong... Probably... > John > > > > -----Original Message----- > > From: andrew beck [mailto:[email protected]] > > Sent: November-11-21 7:37 PM > > To: Enhanced Machine Controller (EMC) > > Subject: Re: [Emc-users] Touch Probe > > > > Awesome > > > > I want one ???? > > > > On Fri, 12 Nov 2021, 16:34 John Dammeyer, <[email protected]> > wrote: > > > > > Wires have been run. Been a bit difficult to get it working as my > machine > > > is still imperial and most of the Probe Screen is targeted to metric. > Add > > > that you need to type Enter to make a parameter change permanent and > you > > > have no idea which field is being changed the point above the work to > put > > > the probe for measuring is a bit obscure. > > > Finally figured it out and made this short video. > > > https://youtu.be/y1CBt3HYnvU > > > > > > John > > > > > > > -----Original Message----- > > > > From: John Dammeyer [mailto:[email protected]] > > > > Sent: November-10-21 12:50 PM > > > > To: Enhanced Machine Controller (EMC) > > > > Subject: [Emc-users] Touch Probe > > > > > > > > My PR series touch probe arrived from Belarus today (www.vers.by ). > > > Quality looks really nice. Now to decide which input to use to > > > > connect it to LCNC and run the wires. I already have the probe > screen > > > panel installed. > > > > > > > > More when it's been tested. > > > > > > > > John > > > > > > > > > > > > "ELS! Nothing else works as well for your Lathe" > > > > Automation Artisans Inc. > > > > www dot autoartisans dot com > > > > > > > > > > > > _______________________________________________ > > > > Emc-users mailing list > > > > [email protected] > > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > > > > _______________________________________________ > > > Emc-users mailing list > > > [email protected] > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > _______________________________________________ > > Emc-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
