On 2022/04/14 17:25, Peter C. Wallace wrote:

I suspect that you are right. For the sake of time running out I just slaved the X stepgen in the bit file. I am using a simple trivkins with no slave axis defined. The only issue now is that the DIR signal on the slave has to be inverted somehow. Is there a way to NOT the pin in the bit definition?

setp hm2_7i92.0.stepgen.xx.direction.invert_output true


I know that one but I am brutalizing the bit file by putting the stepgen 0 on two allocations. I would like to invert the StepGenDirPin in the bit file before I compile. If possible.



Peter Wallace
Mesa Electronics



_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users


_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users


Peter Wallace
Mesa Electronics

(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.



_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users


_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to