On 2022/04/14 18:26, Peter C. Wallace wrote:
On Thu, 14 Apr 2022, Marius wrote:
Date: Thu, 14 Apr 2022 17:56:53 +0200
From: Marius <mar...@mastercut.co.za>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] Looking for 7i92 bit file
On 2022/04/14 17:25, Peter C. Wallace wrote:
I suspect that you are right. For the sake of time running out I
just slaved the X stepgen in the bit file. I am using a simple
trivkins with no slave axis defined. The only issue now is that the
DIR signal on the slave has to be inverted somehow. Is there a way
to NOT the pin in the bit definition?
setp hm2_7i92.0.stepgen.xx.direction.invert_output true
I know that one but I am brutalizing the bit file by putting the
stepgen 0 on two allocations. I would like to invert the
StepGenDirPin in the bit file before I compile. If possible.
That seem;a a bit crazy to me and prevents proper gantry homing for
example
why not just fix the hal file?
Agreed but I am now desperate to get things working. I have no control
over that section of the hal file. The slave axis looks identical to the
master axis. I cannot see anything that I can do to fix it.
I have a thought about the issue. I set kinstype from BOTH to 1 in order
to combine the jog buttons and the machine is not forced to home before
jogging. The machine only has one home switch on every axis. SO maybe
the rules are not met. I don't know.
This is a drop in upgrade so I am not allowed to change any of the
wiring. The machine ran on Mach3 previously.
Peter Wallace
Mesa Electronics
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
