And I have several CNC machines here for testing. If you guys need someone to test stuff
One if them is a linear rail machine that really really feels the lack in the current TP so would be good to see the difference On Thu, 2 Feb 2023, 06:51 John Dammeyer, <jo...@autoartisans.com> wrote: > I've just been emailed that my second BoB has been shipped. Once that > arrives I have: > Pi4 + Mesa 7i92H + 2xBoB + power supplies. > I'd also be willing to test, assuming I can be sent an img file to do a > stock newbie type installation for an open loop stepper controlled CNC > router or a mill. > > I'd use an existing hal/ini file combination and make whatever changes are > required for the Tormach based install. I'd look at using the I/O modeled > after the image for the Clearpath CNC > https://www.centroidcnc.com/centroid_diy/acorn_cnc_controller.html > But create an image with the components I'm using. > John > > > -----Original Message----- > > From: Sam Sokolik [mailto:samco...@gmail.com] > > Sent: January-31-23 7:43 AM > > To: Enhanced Machine Controller (EMC) > > Subject: Re: [Emc-users] Running PathPilot on non-Tormach Machines > > > > I would certainly go back into testing mode if Rob merged the TP > changes.. > > :) That is stuff you can setup and let run.. > > > > sam > > > > On Tue, Jan 31, 2023 at 7:05 AM andy pugh <bodge...@gmail.com> wrote: > > > > > On Mon, 30 Jan 2023 at 11:16, Rick Moscoloni <rmoscol...@gmail.com> > wrote: > > > > > > > > Hi Andy, could this be merged to master? or are proprietary? > > > > > > It has been offered to us, but it doesn't merge cleanly as it predates > > > the Joints-Axes changes. > > > > > > Rob Ellenberg said, (April 2021) > > > There has been some divergence in the TP but not an impossible amount. > > > The main challenge there is getting the associated emccanon changes > > > merged, because max velocity / acceleration is calculated differently, > > > and all those changes are mixed in with things like the coordinate > > > transform overhaul (so we have to either tease that out again or port > > > a big chunk of interp changes too). Do you know of anyone in the > > > community who would be willing to do testing? I've added some unit > > > tests for the TP / blending improvements, so it won't take as much > > > functional testing to prove out the basics. > > > > > > > > > > > > -- > > > atp > > > "A motorcycle is a bicycle with a pandemonium attachment and is > > > designed for the especial use of mechanical geniuses, daredevils and > > > lunatics." > > > � George Fitch, Atlanta Constitution Newspaper, 1912 > > > > > > > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
