But I need to read them when they are not applied. (I'm not using the tool offsets in the conventional manor.)
Todd Zuercher P. Graham Dunn Inc.<http://www.pgrahamdunn.com/index.php> 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 From: Andy Pugh <bodge...@gmail.com> Sent: Friday, May 10, 2024 3:31 PM To: Todd Zuercher <to...@pgrahamdunn.com> Cc: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] Global Named Parameter? [EXTERNAL EMAIL] Be sure links are safe. On 10 May 2024, at 19:55, Todd Zuercher <to...@pgrahamdunn.com<mailto:to...@pgrahamdunn.com>> wrote: Is there a way to bring out a tool offset to a hal pin? HALUI<http://linuxcnc.org/docs/stable/html/man/man1/halui.1.html#Tool> linuxcnc.org<http://linuxcnc.org/docs/stable/html/man/man1/halui.1.html#Tool> [cid:image001.png@01DAA2F4.C58B4690]<http://linuxcnc.org/docs/stable/html/man/man1/halui.1.html#Tool> Halui.tool....
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
