On 12/20/24 21:17, johnd wrote:
Does LinuxCNC require an index pulse on the spindle encoder to do rigid
tapping?ThanksJohnSent from my Samsung S10
short answer, yes. I glued a small screw to the top end of the spindle,
and detect it with an ats-667 hal switch mounted adjacent. This will
need additional logic to change the edge used as index according to
spindle direction.
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
