> > You are ahead of me Leonardo, my machine drivers are all running wheezy > yet as I'm somewhat mid project, so I've not seen any of the above. >
Well, I always install the last LIVE CD version on every new machine. And from then I usually don't upgrade if it's not necessary. While I am running bookworm on this box, all up to date, I am not at all > happy with it. If trixie doesn't fix my complaints, I'll bail out of > debian. in favor of ubuntu. Is it because of Debian 12? or because of the GUI you're using? El mar, 25 feb 2025 a las 22:20, gene heskett (<ghesk...@shentel.net>) escribió: > On 2/25/25 15:07, Leonardo Marsaglia wrote: > > Hi Gene! > > > > Here it goes: > > > > Print file information: > > RUN_IN_PLACE=no > > LINUXCNC_DIR= > > LINUXCNC_BIN_DIR=/usr/bin > > LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc > > LINUXCNC_SCRIPT_DIR= > > LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules > > LINUXCNC_CONFIG_DIR= > > LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs > > INIVAR=inivar > > HALCMD=halcmd > > LINUXCNC_EMCSH=/usr/bin/wish8.6 > > LINUXCNC - 2.9.4 > > Machine configuration directory is > '/home/puma/linuxcnc/configs/sim.touchy' > > Machine configuration file is 'touchy.ini' > > INIFILE=/home/puma/linuxcnc/configs/sim.touchy/touchy.ini > > VERSION=1.1 > > PARAMETER_FILE=sim.var > > TPMOD= > > HOMEMOD= > > TASK=milltask > > HALUI= > > DISPLAY=touchy > > COORDINATES=X Y Z > > KINEMATICS=trivkins > > Starting LinuxCNC... > > Starting LinuxCNC server program: linuxcncsvr > > Loading Real Time OS, RTAPI, and HAL_LIB modules > > Starting LinuxCNC IO program: io > > linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod > > Found file(lib): /usr/share/linuxcnc/hallib/core_sim.hal > > Starting TASK program: milltask > > Running HAL command: loadusr gladevcp --always_above -c touchy_test > > touchy_test_panel.glade > > Starting DISPLAY program: touchy > > Issuing EMC_TRAJ_SET_TERM_COND -- ( +222,+112, +0, +2,0.001000,) > > Issuing EMC_TRAJ_SET_G5X -- ( +224,+176, +0, > > > > +1,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,) > > Issuing EMC_TRAJ_SET_G92 -- ( +227,+168, > > > > +0,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,) > > Issuing EMC_TRAJ_SET_ROTATION -- ( +226,+104, +0,0.000000,) > > Issuing EMC_TRAJ_SET_TELEOP_ENABLE -- ( +230,+104, +1, +1,) > > Issuing EMC_TASK_PLAN_SET_BLOCK_DELETE -- ( +518,+24, +2,\000,) > > Issuing EMC_TASK_PLAN_SET_OPTIONAL_STOP -- ( +517,+24, +3,\001,) > > Issuing EMC_TASK_PLAN_CLOSE -- ( +514,+24, +4,) > > Issuing EMC_TASK_PLAN_OPEN -- ( +506,+280, +5,/tmp/tmpmv8g5frn,) > > Issuing EMC_TRAJ_SET_MAX_VELOCITY -- ( +207,+104, +6,1.666667,) > > INI /home/puma/linuxcnc/configs/sim.touchy/touchy.ini > > COORDINATES = XYZABCUVW > > TOUCHY postgui filename: ['touchy_postgui.hal'] > > Shutting down and cleaning up LinuxCNC... > > task: 3020 cycles, min=0.000018, max=0.002077, avg=0.001069, 0 latency > > excursions (> 10x expected cycle time of 0.001000s) > > Removing HAL_LIB, RTAPI, and Real Time OS modules > > Removing NML shared memory segments > > You are ahead of me Leonardo, my machine drivers are all running wheezy > yet as I'm somewhat mid project, so I've not seen any of the above. > > While I am running bookworm on this box, all up to date, I am not at all > happy with it. If trixie doesn't fix my complaints, I'll bail out of > debian. in favor of ubuntu. > > Debug file information: > > > Note: Using POSIX realtime > > [GladeVCP][ [36mINFO [0m] Logging to: [33m/home/puma/gladevcp.log [0m > > (logger.py:106) > > > > (touchy:2925): Gtk-WARNING **: 17:00:55.150: Theme parsing error: > > <data>:1:26: Junk at end of value for font-family > > /usr/bin/touchy:637: DeprecationWarning: Gtk.Widget.override_font is > > deprecated > > w.override_font(self.control_font) > > [GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] filter Extension Parsing > > Error: 'NoneType' object is not iterable > > Using Default: ALL (*) (qt_istat.py:631) > > [GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] Valid Extension Parsing > Error: > > 'NoneType' object is not iterable > > Using Default: * (qt_istat.py:615) > > [GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] Missing [DISPLAY] > > LINEAR_INCREMENTS- using defaults. (qt_istat.py:303) > > [GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No > > DEFAULT_LINEAR_VELOCITY Entry in DISPLAY, Using: 1 (qt_istat.py:532) > > [GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No > > MIN_LINEAR_VELOCITY Entry in DISPLAY, Using: 0 (qt_istat.py:532) > > [GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No > > MAX_LINEAR_VELOCITY Entry in DISPLAY, Using: 5 (qt_istat.py:532) > > [GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No > > DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:532) > > [GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No > > MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:532) > > [GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No > > MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:532) > > [GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No > > MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:532) > > [GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No > > MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:532) > > [GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No > > MAX_FEED_OVERRIDE Entry in DISPLAY, Using: 1.5 (qt_istat.py:532) > > touchy_postgui.hal:7: Pin 'touchy_test.mpg' does not exist > > 2891 > > 2918 > > Stopping realtime threads > > Unloading hal components > > Traceback (most recent call last): > > File "/usr/lib/python3/dist-packages/gi/_ossighelper.py", line 92, in > > signal_notify > > def signal_notify(source, condition): > > > > KeyboardInterrupt > > Note: Using POSIX realtime > > /usr/lib/python3/dist-packages/gi/_ossighelper.py:119: Warning: Source ID > > 14 was not found when attempting to remove it > > GLib.source_remove(source_id) > > shmctl(32798, IPC_STAT, ...): Invalid argument > > shmctl(32797, IPC_STAT, ...): Invalid argument > > º > > > > El mar, 25 feb 2025 a las 15:45, gene heskett (<ghesk...@shentel.net>) > > escribió: > > > >> On 2/25/25 11:57, Leonardo Marsaglia wrote: > >>> Hi guys, > >>> > >>> I'm trying to simulate touchy on a new PC to eventually use it as my > main > >>> GUI but I'm getting the attached error. This is a DEBIAN 12 clean > install > >>> using the ISO from LCNC. > >>> > >>> Any thoughts? > >>> > >>> Thank you > >>> The list strips attachments. copy/paste the error into the message > text. > >>> Cheers, Gene Heskett, CET. > > -- > "There are four boxes to be used in defense of liberty: > soap, ballot, jury, and ammo. Please use in that order." > -Ed Howdershelt (Author, 1940) > If we desire respect for the law, we must first make the law respectable. > - Louis D. Brandeis > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
