On 2/25/25 15:07, Leonardo Marsaglia wrote:
Hi Gene!
Here it goes:
Print file information:
RUN_IN_PLACE=no
LINUXCNC_DIR=
LINUXCNC_BIN_DIR=/usr/bin
LINUXCNC_TCL_DIR=/usr/lib/tcltk/linuxcnc
LINUXCNC_SCRIPT_DIR=
LINUXCNC_RTLIB_DIR=/usr/lib/linuxcnc/modules
LINUXCNC_CONFIG_DIR=
LINUXCNC_LANG_DIR=/usr/lib/tcltk/linuxcnc/msgs
INIVAR=inivar
HALCMD=halcmd
LINUXCNC_EMCSH=/usr/bin/wish8.6
LINUXCNC - 2.9.4
Machine configuration directory is
'/home/puma/linuxcnc/configs/sim.touchy'
Machine configuration file is 'touchy.ini'
INIFILE=/home/puma/linuxcnc/configs/sim.touchy/touchy.ini
VERSION=1.1
PARAMETER_FILE=sim.var
TPMOD=
HOMEMOD=
TASK=milltask
HALUI=
DISPLAY=touchy
COORDINATES=X Y Z
KINEMATICS=trivkins
Starting LinuxCNC...
Starting LinuxCNC server program: linuxcncsvr
Loading Real Time OS, RTAPI, and HAL_LIB modules
Starting LinuxCNC IO program: io
linuxcnc TPMOD=tpmod HOMEMOD=homemod EMCMOT=motmod
Found file(lib): /usr/share/linuxcnc/hallib/core_sim.hal
Starting TASK program: milltask
Running HAL command: loadusr gladevcp --always_above -c touchy_test
touchy_test_panel.glade
Starting DISPLAY program: touchy
Issuing EMC_TRAJ_SET_TERM_COND -- ( +222,+112, +0, +2,0.001000,)
Issuing EMC_TRAJ_SET_G5X -- ( +224,+176, +0,
+1,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,)
Issuing EMC_TRAJ_SET_G92 -- ( +227,+168,
+0,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,0.000000,)
Issuing EMC_TRAJ_SET_ROTATION -- ( +226,+104, +0,0.000000,)
Issuing EMC_TRAJ_SET_TELEOP_ENABLE -- ( +230,+104, +1, +1,)
Issuing EMC_TASK_PLAN_SET_BLOCK_DELETE -- ( +518,+24, +2,\000,)
Issuing EMC_TASK_PLAN_SET_OPTIONAL_STOP -- ( +517,+24, +3,\001,)
Issuing EMC_TASK_PLAN_CLOSE -- ( +514,+24, +4,)
Issuing EMC_TASK_PLAN_OPEN -- ( +506,+280, +5,/tmp/tmpmv8g5frn,)
Issuing EMC_TRAJ_SET_MAX_VELOCITY -- ( +207,+104, +6,1.666667,)
INI /home/puma/linuxcnc/configs/sim.touchy/touchy.ini
COORDINATES = XYZABCUVW
TOUCHY postgui filename: ['touchy_postgui.hal']
Shutting down and cleaning up LinuxCNC...
task: 3020 cycles, min=0.000018, max=0.002077, avg=0.001069, 0 latency
excursions (> 10x expected cycle time of 0.001000s)
Removing HAL_LIB, RTAPI, and Real Time OS modules
Removing NML shared memory segments
You are ahead of me Leonardo, my machine drivers are all running wheezy
yet as I'm somewhat mid project, so I've not seen any of the above.
While I am running bookworm on this box, all up to date, I am not at all
happy with it. If trixie doesn't fix my complaints, I'll bail out of
debian. in favor of ubuntu.
Debug file information:
Note: Using POSIX realtime
[GladeVCP][ [36mINFO [0m] Logging to: [33m/home/puma/gladevcp.log [0m
(logger.py:106)
(touchy:2925): Gtk-WARNING **: 17:00:55.150: Theme parsing error:
<data>:1:26: Junk at end of value for font-family
/usr/bin/touchy:637: DeprecationWarning: Gtk.Widget.override_font is
deprecated
w.override_font(self.control_font)
[GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] filter Extension Parsing
Error: 'NoneType' object is not iterable
Using Default: ALL (*) (qt_istat.py:631)
[GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] Valid Extension Parsing
Error:
'NoneType' object is not iterable
Using Default: * (qt_istat.py:615)
[GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] Missing [DISPLAY]
LINEAR_INCREMENTS- using defaults. (qt_istat.py:303)
[GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No
DEFAULT_LINEAR_VELOCITY Entry in DISPLAY, Using: 1 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No
MIN_LINEAR_VELOCITY Entry in DISPLAY, Using: 0 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No
MAX_LINEAR_VELOCITY Entry in DISPLAY, Using: 5 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No
DEFAULT_SPINDLE_0_SPEED Entry in DISPLAY, Using: 200 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No
MIN_SPINDLE_0_SPEED Entry in DISPLAY, Using: 100 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No
MAX_SPINDLE_0_SPEED Entry in DISPLAY, Using: 2500 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No
MAX_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 1 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No
MIN_SPINDLE_0_OVERRIDE Entry in DISPLAY, Using: 0.5 (qt_istat.py:532)
[GladeVCP.QTVCP.QT_ISTAT][ [33mWARNING [0m] INI Parsing Error, No
MAX_FEED_OVERRIDE Entry in DISPLAY, Using: 1.5 (qt_istat.py:532)
touchy_postgui.hal:7: Pin 'touchy_test.mpg' does not exist
2891
2918
Stopping realtime threads
Unloading hal components
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/gi/_ossighelper.py", line 92, in
signal_notify
def signal_notify(source, condition):
KeyboardInterrupt
Note: Using POSIX realtime
/usr/lib/python3/dist-packages/gi/_ossighelper.py:119: Warning: Source ID
14 was not found when attempting to remove it
GLib.source_remove(source_id)
shmctl(32798, IPC_STAT, ...): Invalid argument
shmctl(32797, IPC_STAT, ...): Invalid argument
º
El mar, 25 feb 2025 a las 15:45, gene heskett (<ghesk...@shentel.net>)
escribió:
On 2/25/25 11:57, Leonardo Marsaglia wrote:
Hi guys,
I'm trying to simulate touchy on a new PC to eventually use it as my
main
GUI but I'm getting the attached error. This is a DEBIAN 12 clean
install
using the ISO from LCNC.
Any thoughts?
Thank you
The list strips attachments. copy/paste the error into the message
text.
Cheers, Gene Heskett, CET.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
