Hi Sam and Peter, Clearly my googlefoo is lagging. Thanks for filling in the blanks. Isa motherboards are still available; both used and new. New will run about $200 plus processor. Used a lot less (maybe) and a gamble.
I still need to test what I have, it might still work but has set idle for several years. Some wiring needs to be replaced and tested. I have new brushes in the spindle motor. Still the more prudent route may be to go 5i25-7i77 and ’simply’ move over all the I/O and analog signals. Stay tuned. Dave > On Mar 28, 2025, at 7:42 AM, Sam Sokolik <samco...@gmail.com> wrote: > > It is still in the docs.. > > https://linuxcnc.org/docs/stable/html/drivers/servo-to-go.html > > On Fri, Mar 28, 2025 at 9:25 AM Dave Engvall <dengv...@charter.net> wrote: > >> Is there any support for the stg card do I own an orphan? >> >> Dave >> >> >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
