That sounds good, however, I'm going to upgrade to 7.0-STABLE and try E 
again.  If I run into the same issue, then I'll contact you and we can 
start debugging.

Many thanks,

Mike McNeil

Ravenlock wrote:
> You can always update to 7.0-STABLE which is what I am running.
>
> would you be willing to run another wm, to aid in the debugging of this?
>  Say, twm or something.  Then you could run E inside xnest.
>
> If so I can help walk you through it.  But it would be easiest over IRC.
>  So, if interested...
>   1) get twm running
>   2) install xchat (or whatever you like)
>   3) connect to Freenode and join #e.
>
> -ravenlock
>
> On 04/25/2008 11:20, M.McNeil wrote:
>   
>> Ravenlock,
>>
>> I did as you suggested, but I get the same results.  E17 segfaults at
>> the splash screen, I recover, 15 seconds later, it segfaults again. I'm
>> beginning to wonder if this is something specific with FreeBSD
>> 7.0-RELEASE.  I didn't have these issues under 6.3-RELEASE.
>>
>> Thanks again for your efforts,
>>
>> Mike McNeil
>>
>> Ravenlock wrote:
>>     
>>> Mike,
>>>
>>> I notice you appear to be using the 23oz theme by sda?  Is this correct?
>>>  I believe therein might be the issue.  Please goto ~/.e/e/config.  Once
>>> there 'mv default default.old'.  Then start X as usual.
>>>
>>> Let me know how this turns out.
>>>
>>> -ravenlock
>>>
>>> On 04/24/2008 11:19, M.McNeil wrote:
>>>  
>>>       
>>>> Hi,
>>>>
>>>> I'm sending this again in hopes to get some help.
>>>>
>>>> Thanks again,
>>>>
>>>> Mike McNeil
>>>>
>>>> -------- Original Message --------
>>>> Subject:     Re: [e-users] E17 segfaulting again
>>>> Date:     Mon, 21 Apr 2008 14:48:55 -0700
>>>> From:     M.McNeil <[EMAIL PROTECTED]>
>>>> To:     Carsten Haitzler (The Rasterman) <[EMAIL PROTECTED]>
>>>> CC:     enlightenment-users@lists.sourceforge.net
>>>> References:     <[EMAIL PROTECTED]>
>>>> <[EMAIL PROTECTED]>
>>>> <[EMAIL PROTECTED]>
>>>> <[EMAIL PROTECTED]>
>>>>
>>>>
>>>>
>>>> Here's what I was able to capture, following the instructions you
>>>> gave in the thread below:
>>>>
>>>> [mmcneil]gdb enlightenment 67866
>>>> GNU gdb 6.1.1 [FreeBSD]
>>>> Copyright 2004 Free Software Foundation, Inc.
>>>> GDB is free software, covered by the GNU General Public License, and
>>>> you are
>>>> welcome to change it and/or distribute copies of it under certain
>>>> conditions.
>>>> Type "show copying" to see the conditions.
>>>> There is absolutely no warranty for GDB.  Type "show warranty" for
>>>> details.
>>>>
>>>> [Switching to Thread 0x28b01100 (LWP 100097)]
>>>> 0x2898a86f in poll () from /lib/libc.so.7
>>>> (gdb) bt
>>>> #0  0x2898a86f in poll () from /lib/libc.so.7
>>>> #1  0x2868ef53 in _XWaitForReadable () from /usr/local/lib/libX11.so.6
>>>> #2  0x2868f3c8 in _XRead () from /usr/local/lib/libX11.so.6
>>>> #3  0x28690e87 in _XReadEvents () from /usr/local/lib/libX11.so.6
>>>> #4  0x2866f85c in XNextEvent () from /usr/local/lib/libX11.so.6
>>>> #5  0x080dc21e in e_alert_show (
>>>>     text=0x814d3c0 "This is very bad. Enlightenment SEGV'd.\n\nThis
>>>> is not meant to happen and is likely a sign of\na bug in
>>>> Enlightenment or the libraries it relies\non. You can gdb attach to
>>>> this process now to try\ndebug i"...)
>>>>     at e_alert.c:129
>>>> #6  0x080c3372 in e_sigseg_act (x=11, info=0xbfbfb760, data=0xbfbfb4a0)
>>>>     at e_signals.c:48
>>>> #7  <signal handler called>
>>>> #8  0x289bb5f3 in strcasecmp () from /lib/libc.so.7
>>>> #9  0x2828f5b5 in object_text_font_cache_font_find_file (fd=0x2996c550,
>>>>     font=0x29a3dc68 "Matrix:style=Bold") at evas_font_dir.c:543
>>>> #10 0x2828f6d2 in object_text_font_cache_font_find (fd=0x2996c550,
>>>>     font=0x29a3dc68 "Matrix:style=Bold") at evas_font_dir.c:573
>>>> #11 0x2828e587 in evas_font_dir_cache_find (
>>>>     dir=0x28baf318 "/home/mmcneil/.e/e/fonts",
>>>>     font=0x29a3dc68 "Matrix:style=Bold") at evas_font_dir.c:58
>>>> #12 0x2828ebcd in evas_font_load (evas=0x28bcb160,
>>>>     name=0x29a3af20 "Matrix:style=Bold", source=0x0, size=12)
>>>>     at evas_font_dir.c:232
>>>> ---Type <return> to continue, or q <return> to quit---
>>>> #13 0x2827b519 in evas_object_text_font_set (obj=0x29d513a0,
>>>>     font=0x29a3af20 "Matrix:style=Bold", size=12) at
>>>> evas_object_text.c:187
>>>> #14 0x281a82c5 in _edje_part_recalc_single (ed=0x29dfb1c0,
>>>> ep=0x2a681900,
>>>>     desc=0x29d40700, chosen_desc=0x29d40700, rel1_to_x=0x0,
>>>> rel1_to_y=0x0,
>>>>     rel2_to_x=0x0, rel2_to_y=0x0, confine_to=0x0, params=0xbfbfbd00,
>>>> flags=3)
>>>>     at edje_calc.c:728
>>>> #15 0x281aa1fc in _edje_part_recalc (ed=0x29dfb1c0, ep=0x2a681900,
>>>> flags=3)
>>>>     at edje_calc.c:1329
>>>> #16 0x281a64e3 in _edje_recalc (ed=0x29dfb1c0) at edje_calc.c:162
>>>> #17 0x281c469a in _edje_thaw (ed=0x29dfb1c0) at edje_util.c:1961
>>>> #18 0x281ba851 in _edje_object_file_set_internal (obj=0x29d50860,
>>>>     file=0x28b08348
>>>> "/home/mmcneil/.e/e/themes/23oz_by_sda_16_999_042.edj",
>>>>     part=0x814bfa4 "e/widgets/menu/default/background", group_path=0x0)
>>>>     at edje_load.c:568
>>>> #19 0x281b9577 in edje_object_file_set (obj=0x29d50860,
>>>>     file=0x28b08348
>>>> "/home/mmcneil/.e/e/themes/23oz_by_sda_16_999_042.edj",
>>>>     part=0x814bfa4 "e/widgets/menu/default/background") at
>>>> edje_load.c:35
>>>> #20 0x080ca14d in e_theme_edje_object_set (o=0x29d50860,
>>>>     category=0xbfbfc014 "base/theme",
>>>>     group=0x814bfa4 "e/widgets/menu/default/background") at
>>>> e_theme.c:180
>>>> #21 0x080ca24b in e_theme_edje_object_set (o=0x29d50860,
>>>>     category=0x814be69 "base/theme/menus",
>>>>     group=0x814bfa4 "e/widgets/menu/default/background") at
>>>> e_theme.c:208
>>>> #22 0x080ae502 in _e_menu_realize (m=0x299ffa80) at e_menu.c:1400
>>>> ---Type <return> to continue, or q <return> to quit---
>>>> #23 0x080ab97f in e_menu_activate_mouse (m=0x299ffa80,
>>>> zone=0x28b1f480, x=296,
>>>>     y=289, w=1, h=1, dir=4, activate_time=20898643) at e_menu.c:283
>>>> #24 0x080d2bf4 in _e_actions_act_menu_show_go_mouse (obj=0x28b1f480,
>>>>     params=0x28b79d98 "main", ev=0x2994a790) at e_actions.c:1442
>>>> #25 0x080ce188 in e_bindings_mouse_down_event_handle (
>>>>     ctxt=E_BINDING_CONTEXT_ZONE, obj=0x28b1f480, ev=0x2994a790)
>>>>     at e_bindings.c:255
>>>> #26 0x08080766 in _e_zone_cb_bg_mouse_down (data=0x28b1f480,
>>>> evas=0x28bc95c0,
>>>>     obj=0x28bd2c80, event_info=0xbfbfc2dc) at e_zone.c:755
>>>> #27 0x28262de3 in evas_object_event_callback_call (obj=0x28bd2c80,
>>>>     type=EVAS_CALLBACK_MOUSE_DOWN, event_info=0xbfbfc2dc)
>>>>     at evas_callbacks.c:121
>>>> #28 0x2826464e in evas_event_feed_mouse_down (e=0x28bc95c0, b=1,
>>>>     flags=EVAS_BUTTON_NONE, timestamp=20898643, data=0x0) at
>>>> evas_events.c:267
>>>> #29 0x0807e1d5 in _e_container_cb_mouse_down (data=0x0, type=21,
>>>>     event=0x2994a790) at e_container.c:1091
>>>> #30 0x287a1529 in _ecore_event_call () at ecore_events.c:429
>>>> #31 0x287aa623 in _ecore_main_loop_iterate_internal (once_only=0)
>>>>     at ecore_main.c:678
>>>> #32 0x287a964f in ecore_main_loop_begin () at ecore_main.c:85
>>>> #33 0x08069fa7 in main (argc=1, argv=0xbfbfe8d4) at e_main.c:937
>>>> (gdb) cont
>>>> Continuing.
>>>> [New LWP 100097]
>>>>
>>>> Program received signal SIGTRAP, Trace/breakpoint trap.
>>>> [Switching to LWP 100097]
>>>> Cannot remove breakpoints because program is no longer writable.
>>>> It might be running in another process.
>>>> Further execution is probably impossible.
>>>> 0x281593e0 in ?? () from /libexec/ld-elf.so.1
>>>> (gdb) quit
>>>> The program is running.  Quit anyway (and detach it)? (y or n) y
>>>> Detaching from program: /opt/e17/bin/enlightenment, process 67866
>>>> [mmcneil:~]exit
>>>>
>>>> Script done on Mon Apr 21 14:34:47 2008
>>>>
>>>> Thanks,
>>>>
>>>> Mike McNeil
>>>>
>>>> Carsten Haitzler (The Rasterman) wrote:
>>>>    
>>>>         
>>>>> On Thu, 17 Apr 2008 10:40:18 -0700 "M.McNeil" <[EMAIL PROTECTED]>
>>>>> babbled:
>>>>>
>>>>>        
>>>>>           
>>>>>> I found this when I ran gdb a second time and did a backtrace:
>>>>>>             
>>>>>>             
>>>>> you should gdb attach WHEN e has segfaulted (i.e - the white box of
>>>>> death is on
>>>>> the screen(, OR you should alloe e to continue from this attached
>>>>> state until
>>>>> the segfault occurs (cont command in gdb)
>>>>>
>>>>>        
>>>>>           
>>>>>> [Switching to Thread 0x28b01100 (LWP 100142)]
>>>>>> 0x2898a86f in poll () from /lib/libc.so.7
>>>>>> (gdb) bt
>>>>>> #0  0x2898a86f in poll () from /lib/libc.so.7
>>>>>> #1  0x2868ef53 in _XWaitForReadable () from /usr/local/lib/libX11.so.6
>>>>>> #2  0x2868f3c8 in _XRead () from /usr/local/lib/libX11.so.6
>>>>>> #3  0x2868ff82 in _XReply () from /usr/local/lib/libX11.so.6
>>>>>> #4  0x286874e5 in XSync () from /usr/local/lib/libX11.so.6
>>>>>> #5  0x28a65a65 in evas_software_x11_outbuf_idle_flush (buf=0x28b255e0)
>>>>>>     at evas_outbuf.c:718
>>>>>> #6  0x28a63ed6 in eng_output_idle_flush (data=0x29604180) at
>>>>>> evas_engine.c:338
>>>>>> #7  0x282916f5 in evas_render_idle_flush (e=0x28bdb5c0) at
>>>>>> evas_render.c:519
>>>>>> #8  0x281e1806 in _ecore_evas_cb_idle_flush (data=0x28bc26a0)
>>>>>>     at ecore_evas.c:1900
>>>>>> #9  0x287aea3d in _ecore_timer_call (when=1208453594.5901239)
>>>>>>     at ecore_timer.c:328
>>>>>> #10 0x287aa212 in _ecore_main_loop_iterate_internal (once_only=0)
>>>>>>     at ecore_main.c:531
>>>>>> #11 0x287a964f in ecore_main_loop_begin () at ecore_main.c:85
>>>>>> #12 0x08069fa7 in main (argc=1, argv=0xbfbfe920) at e_main.c:937
>>>>>> (gdb)
>>>>>>
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Mike M.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Carsten Haitzler (The Rasterman) wrote:
>>>>>>            
>>>>>>             
>>>>>>> On Wed, 16 Apr 2008 16:26:51 -0700 "M.McNeil" <[EMAIL PROTECTED]>
>>>>>>> babbled:
>>>>>>>
>>>>>>>                  
>>>>>>>               
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I just updated my E17 installation using the easy_e17 script. 
>>>>>>>> The update went fine as usual, however, upon restarting E17, E17
>>>>>>>> started to segfault.  I rebooted my machine, same problem.  I
>>>>>>>> then, did a fresh installation of E17 and got the same results. 
>>>>>>>> When I move my mouse around the desktop, E17 segfaults.  I'm
>>>>>>>> running FreeBSD 7.0-RELEASE, can someone take a look into this ? 
>>>>>>>> My machine is basically unusable at this time.
>>>>>>>>                         
>>>>>>>>                 
>>>>>>> no i can't look into it. e17 works just fine here. build e and efl
>>>>>>> libs with
>>>>>>> gdb debugging and get a backtrace and we might be able to do
>>>>>>> something. try
>>>>>>> valgrind if the backtrace isn't much use.
>>>>>>>
>>>>>>>                   
>>>>>>>               
>>>>>> -- 
>>>>>>
>>>>>> -------------------------------------------------
>>>>>>
>>>>>> Mike McNeil
>>>>>>
>>>>>> Sr. Network Engineer
>>>>>>
>>>>>> Information Systems and Technology
>>>>>>
>>>>>> University of California Berkeley
>>>>>>
>>>>>>
>>>>>>             
>>>>>>             
>>>>>         
>>>>>           
>>>> -------------------------------------------------------------------------
>>>>
>>>> This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
>>>> Don't miss this year's exciting event. There's still time to save
>>>> $100. Use priority code J8TL2D2.
>>>> http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
>>>>
>>>> _______________________________________________
>>>> enlightenment-users mailing list
>>>> enlightenment-users@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/enlightenment-users
>>>>
>>>>
>>>> -------------------------------------------------------------------------
>>>>
>>>> This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
>>>> Don't miss this year's exciting event. There's still time to save
>>>> $100. Use priority code J8TL2D2.
>>>> http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
>>>>
>>>> _______________________________________________
>>>> enlightenment-users mailing list
>>>> enlightenment-users@lists.sourceforge.net
>>>> https://lists.sourceforge.net/lists/listinfo/enlightenment-users
>>>>
>>>>
>>>>     
>>>>         
>>>   
>>>       
>>     
>
>
>   

-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Don't miss this year's exciting event. There's still time to save $100. 
Use priority code J8TL2D2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
enlightenment-users mailing list
enlightenment-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/enlightenment-users

Reply via email to