I just wanted to let all of you know that E17 is working again on FreeBSD 7.0. I downloaded a fresh copy of E17 sources from CVS, using the easy_e17.sh script, compiled and installed. I was pleasantly surprised when I saw that the segfaults had gone away. I don't know what got fixed over the last two weeks, but thank you very much. I want to say thanks to all of you who pointed me in the right direction when troubleshooting this problem. You guys are awesome!
Regards, Mike McNeil M.McNeil wrote: > That sounds good, however, I'm going to upgrade to 7.0-STABLE and try E > again. If I run into the same issue, then I'll contact you and we can > start debugging. > > Many thanks, > > Mike McNeil > > Ravenlock wrote: > >> You can always update to 7.0-STABLE which is what I am running. >> >> would you be willing to run another wm, to aid in the debugging of this? >> Say, twm or something. Then you could run E inside xnest. >> >> If so I can help walk you through it. But it would be easiest over IRC. >> So, if interested... >> 1) get twm running >> 2) install xchat (or whatever you like) >> 3) connect to Freenode and join #e. >> >> -ravenlock >> >> On 04/25/2008 11:20, M.McNeil wrote: >> >> >>> Ravenlock, >>> >>> I did as you suggested, but I get the same results. E17 segfaults at >>> the splash screen, I recover, 15 seconds later, it segfaults again. I'm >>> beginning to wonder if this is something specific with FreeBSD >>> 7.0-RELEASE. I didn't have these issues under 6.3-RELEASE. >>> >>> Thanks again for your efforts, >>> >>> Mike McNeil >>> >>> Ravenlock wrote: >>> >>> >>>> Mike, >>>> >>>> I notice you appear to be using the 23oz theme by sda? Is this correct? >>>> I believe therein might be the issue. Please goto ~/.e/e/config. Once >>>> there 'mv default default.old'. Then start X as usual. >>>> >>>> Let me know how this turns out. >>>> >>>> -ravenlock >>>> >>>> On 04/24/2008 11:19, M.McNeil wrote: >>>> >>>> >>>> >>>>> Hi, >>>>> >>>>> I'm sending this again in hopes to get some help. >>>>> >>>>> Thanks again, >>>>> >>>>> Mike McNeil >>>>> >>>>> -------- Original Message -------- >>>>> Subject: Re: [e-users] E17 segfaulting again >>>>> Date: Mon, 21 Apr 2008 14:48:55 -0700 >>>>> From: M.McNeil <[EMAIL PROTECTED]> >>>>> To: Carsten Haitzler (The Rasterman) <[EMAIL PROTECTED]> >>>>> CC: enlightenment-users@lists.sourceforge.net >>>>> References: <[EMAIL PROTECTED]> >>>>> <[EMAIL PROTECTED]> >>>>> <[EMAIL PROTECTED]> >>>>> <[EMAIL PROTECTED]> >>>>> >>>>> >>>>> >>>>> Here's what I was able to capture, following the instructions you >>>>> gave in the thread below: >>>>> >>>>> [mmcneil]gdb enlightenment 67866 >>>>> GNU gdb 6.1.1 [FreeBSD] >>>>> Copyright 2004 Free Software Foundation, Inc. >>>>> GDB is free software, covered by the GNU General Public License, and >>>>> you are >>>>> welcome to change it and/or distribute copies of it under certain >>>>> conditions. >>>>> Type "show copying" to see the conditions. >>>>> There is absolutely no warranty for GDB. Type "show warranty" for >>>>> details. >>>>> >>>>> [Switching to Thread 0x28b01100 (LWP 100097)] >>>>> 0x2898a86f in poll () from /lib/libc.so.7 >>>>> (gdb) bt >>>>> #0 0x2898a86f in poll () from /lib/libc.so.7 >>>>> #1 0x2868ef53 in _XWaitForReadable () from /usr/local/lib/libX11.so.6 >>>>> #2 0x2868f3c8 in _XRead () from /usr/local/lib/libX11.so.6 >>>>> #3 0x28690e87 in _XReadEvents () from /usr/local/lib/libX11.so.6 >>>>> #4 0x2866f85c in XNextEvent () from /usr/local/lib/libX11.so.6 >>>>> #5 0x080dc21e in e_alert_show ( >>>>> text=0x814d3c0 "This is very bad. Enlightenment SEGV'd.\n\nThis >>>>> is not meant to happen and is likely a sign of\na bug in >>>>> Enlightenment or the libraries it relies\non. You can gdb attach to >>>>> this process now to try\ndebug i"...) >>>>> at e_alert.c:129 >>>>> #6 0x080c3372 in e_sigseg_act (x=11, info=0xbfbfb760, data=0xbfbfb4a0) >>>>> at e_signals.c:48 >>>>> #7 <signal handler called> >>>>> #8 0x289bb5f3 in strcasecmp () from /lib/libc.so.7 >>>>> #9 0x2828f5b5 in object_text_font_cache_font_find_file (fd=0x2996c550, >>>>> font=0x29a3dc68 "Matrix:style=Bold") at evas_font_dir.c:543 >>>>> #10 0x2828f6d2 in object_text_font_cache_font_find (fd=0x2996c550, >>>>> font=0x29a3dc68 "Matrix:style=Bold") at evas_font_dir.c:573 >>>>> #11 0x2828e587 in evas_font_dir_cache_find ( >>>>> dir=0x28baf318 "/home/mmcneil/.e/e/fonts", >>>>> font=0x29a3dc68 "Matrix:style=Bold") at evas_font_dir.c:58 >>>>> #12 0x2828ebcd in evas_font_load (evas=0x28bcb160, >>>>> name=0x29a3af20 "Matrix:style=Bold", source=0x0, size=12) >>>>> at evas_font_dir.c:232 >>>>> ---Type <return> to continue, or q <return> to quit--- >>>>> #13 0x2827b519 in evas_object_text_font_set (obj=0x29d513a0, >>>>> font=0x29a3af20 "Matrix:style=Bold", size=12) at >>>>> evas_object_text.c:187 >>>>> #14 0x281a82c5 in _edje_part_recalc_single (ed=0x29dfb1c0, >>>>> ep=0x2a681900, >>>>> desc=0x29d40700, chosen_desc=0x29d40700, rel1_to_x=0x0, >>>>> rel1_to_y=0x0, >>>>> rel2_to_x=0x0, rel2_to_y=0x0, confine_to=0x0, params=0xbfbfbd00, >>>>> flags=3) >>>>> at edje_calc.c:728 >>>>> #15 0x281aa1fc in _edje_part_recalc (ed=0x29dfb1c0, ep=0x2a681900, >>>>> flags=3) >>>>> at edje_calc.c:1329 >>>>> #16 0x281a64e3 in _edje_recalc (ed=0x29dfb1c0) at edje_calc.c:162 >>>>> #17 0x281c469a in _edje_thaw (ed=0x29dfb1c0) at edje_util.c:1961 >>>>> #18 0x281ba851 in _edje_object_file_set_internal (obj=0x29d50860, >>>>> file=0x28b08348 >>>>> "/home/mmcneil/.e/e/themes/23oz_by_sda_16_999_042.edj", >>>>> part=0x814bfa4 "e/widgets/menu/default/background", group_path=0x0) >>>>> at edje_load.c:568 >>>>> #19 0x281b9577 in edje_object_file_set (obj=0x29d50860, >>>>> file=0x28b08348 >>>>> "/home/mmcneil/.e/e/themes/23oz_by_sda_16_999_042.edj", >>>>> part=0x814bfa4 "e/widgets/menu/default/background") at >>>>> edje_load.c:35 >>>>> #20 0x080ca14d in e_theme_edje_object_set (o=0x29d50860, >>>>> category=0xbfbfc014 "base/theme", >>>>> group=0x814bfa4 "e/widgets/menu/default/background") at >>>>> e_theme.c:180 >>>>> #21 0x080ca24b in e_theme_edje_object_set (o=0x29d50860, >>>>> category=0x814be69 "base/theme/menus", >>>>> group=0x814bfa4 "e/widgets/menu/default/background") at >>>>> e_theme.c:208 >>>>> #22 0x080ae502 in _e_menu_realize (m=0x299ffa80) at e_menu.c:1400 >>>>> ---Type <return> to continue, or q <return> to quit--- >>>>> #23 0x080ab97f in e_menu_activate_mouse (m=0x299ffa80, >>>>> zone=0x28b1f480, x=296, >>>>> y=289, w=1, h=1, dir=4, activate_time=20898643) at e_menu.c:283 >>>>> #24 0x080d2bf4 in _e_actions_act_menu_show_go_mouse (obj=0x28b1f480, >>>>> params=0x28b79d98 "main", ev=0x2994a790) at e_actions.c:1442 >>>>> #25 0x080ce188 in e_bindings_mouse_down_event_handle ( >>>>> ctxt=E_BINDING_CONTEXT_ZONE, obj=0x28b1f480, ev=0x2994a790) >>>>> at e_bindings.c:255 >>>>> #26 0x08080766 in _e_zone_cb_bg_mouse_down (data=0x28b1f480, >>>>> evas=0x28bc95c0, >>>>> obj=0x28bd2c80, event_info=0xbfbfc2dc) at e_zone.c:755 >>>>> #27 0x28262de3 in evas_object_event_callback_call (obj=0x28bd2c80, >>>>> type=EVAS_CALLBACK_MOUSE_DOWN, event_info=0xbfbfc2dc) >>>>> at evas_callbacks.c:121 >>>>> #28 0x2826464e in evas_event_feed_mouse_down (e=0x28bc95c0, b=1, >>>>> flags=EVAS_BUTTON_NONE, timestamp=20898643, data=0x0) at >>>>> evas_events.c:267 >>>>> #29 0x0807e1d5 in _e_container_cb_mouse_down (data=0x0, type=21, >>>>> event=0x2994a790) at e_container.c:1091 >>>>> #30 0x287a1529 in _ecore_event_call () at ecore_events.c:429 >>>>> #31 0x287aa623 in _ecore_main_loop_iterate_internal (once_only=0) >>>>> at ecore_main.c:678 >>>>> #32 0x287a964f in ecore_main_loop_begin () at ecore_main.c:85 >>>>> #33 0x08069fa7 in main (argc=1, argv=0xbfbfe8d4) at e_main.c:937 >>>>> (gdb) cont >>>>> Continuing. >>>>> [New LWP 100097] >>>>> >>>>> Program received signal SIGTRAP, Trace/breakpoint trap. >>>>> [Switching to LWP 100097] >>>>> Cannot remove breakpoints because program is no longer writable. >>>>> It might be running in another process. >>>>> Further execution is probably impossible. >>>>> 0x281593e0 in ?? () from /libexec/ld-elf.so.1 >>>>> (gdb) quit >>>>> The program is running. Quit anyway (and detach it)? (y or n) y >>>>> Detaching from program: /opt/e17/bin/enlightenment, process 67866 >>>>> [mmcneil:~]exit >>>>> >>>>> Script done on Mon Apr 21 14:34:47 2008 >>>>> >>>>> Thanks, >>>>> >>>>> Mike McNeil >>>>> >>>>> Carsten Haitzler (The Rasterman) wrote: >>>>> >>>>> >>>>> >>>>>> On Thu, 17 Apr 2008 10:40:18 -0700 "M.McNeil" <[EMAIL PROTECTED]> >>>>>> babbled: >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> I found this when I ran gdb a second time and did a backtrace: >>>>>>> >>>>>>> >>>>>>> >>>>>> you should gdb attach WHEN e has segfaulted (i.e - the white box of >>>>>> death is on >>>>>> the screen(, OR you should alloe e to continue from this attached >>>>>> state until >>>>>> the segfault occurs (cont command in gdb) >>>>>> >>>>>> >>>>>> >>>>>> >>>>>>> [Switching to Thread 0x28b01100 (LWP 100142)] >>>>>>> 0x2898a86f in poll () from /lib/libc.so.7 >>>>>>> (gdb) bt >>>>>>> #0 0x2898a86f in poll () from /lib/libc.so.7 >>>>>>> #1 0x2868ef53 in _XWaitForReadable () from /usr/local/lib/libX11.so.6 >>>>>>> #2 0x2868f3c8 in _XRead () from /usr/local/lib/libX11.so.6 >>>>>>> #3 0x2868ff82 in _XReply () from /usr/local/lib/libX11.so.6 >>>>>>> #4 0x286874e5 in XSync () from /usr/local/lib/libX11.so.6 >>>>>>> #5 0x28a65a65 in evas_software_x11_outbuf_idle_flush (buf=0x28b255e0) >>>>>>> at evas_outbuf.c:718 >>>>>>> #6 0x28a63ed6 in eng_output_idle_flush (data=0x29604180) at >>>>>>> evas_engine.c:338 >>>>>>> #7 0x282916f5 in evas_render_idle_flush (e=0x28bdb5c0) at >>>>>>> evas_render.c:519 >>>>>>> #8 0x281e1806 in _ecore_evas_cb_idle_flush (data=0x28bc26a0) >>>>>>> at ecore_evas.c:1900 >>>>>>> #9 0x287aea3d in _ecore_timer_call (when=1208453594.5901239) >>>>>>> at ecore_timer.c:328 >>>>>>> #10 0x287aa212 in _ecore_main_loop_iterate_internal (once_only=0) >>>>>>> at ecore_main.c:531 >>>>>>> #11 0x287a964f in ecore_main_loop_begin () at ecore_main.c:85 >>>>>>> #12 0x08069fa7 in main (argc=1, argv=0xbfbfe920) at e_main.c:937 >>>>>>> (gdb) >>>>>>> >>>>>>> >>>>>>> Thanks, >>>>>>> >>>>>>> Mike M. >>>>>>> >>>>>>> >>>>>>> >>>>>>> Carsten Haitzler (The Rasterman) wrote: >>>>>>> >>>>>>> >>>>>>> >>>>>>>> On Wed, 16 Apr 2008 16:26:51 -0700 "M.McNeil" <[EMAIL PROTECTED]> >>>>>>>> babbled: >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> I just updated my E17 installation using the easy_e17 script. >>>>>>>>> The update went fine as usual, however, upon restarting E17, E17 >>>>>>>>> started to segfault. I rebooted my machine, same problem. I >>>>>>>>> then, did a fresh installation of E17 and got the same results. >>>>>>>>> When I move my mouse around the desktop, E17 segfaults. I'm >>>>>>>>> running FreeBSD 7.0-RELEASE, can someone take a look into this ? >>>>>>>>> My machine is basically unusable at this time. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> no i can't look into it. e17 works just fine here. build e and efl >>>>>>>> libs with >>>>>>>> gdb debugging and get a backtrace and we might be able to do >>>>>>>> something. try >>>>>>>> valgrind if the backtrace isn't much use. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> -- >>>>>>> >>>>>>> ------------------------------------------------- >>>>>>> >>>>>>> Mike McNeil >>>>>>> >>>>>>> Sr. Network Engineer >>>>>>> >>>>>>> Information Systems and Technology >>>>>>> >>>>>>> University of California Berkeley >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> >>>>> ------------------------------------------------------------------------- >>>>> >>>>> This SF.net email is sponsored by the 2008 JavaOne(SM) Conference >>>>> Don't miss this year's exciting event. There's still time to save >>>>> $100. Use priority code J8TL2D2. >>>>> http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone >>>>> >>>>> _______________________________________________ >>>>> enlightenment-users mailing list >>>>> enlightenment-users@lists.sourceforge.net >>>>> https://lists.sourceforge.net/lists/listinfo/enlightenment-users >>>>> >>>>> >>>>> ------------------------------------------------------------------------- >>>>> >>>>> This SF.net email is sponsored by the 2008 JavaOne(SM) Conference >>>>> Don't miss this year's exciting event. There's still time to save >>>>> $100. Use priority code J8TL2D2. >>>>> http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone >>>>> >>>>> _______________________________________________ >>>>> enlightenment-users mailing list >>>>> enlightenment-users@lists.sourceforge.net >>>>> https://lists.sourceforge.net/lists/listinfo/enlightenment-users >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>> >>> >> >> > > ------------------------------------------------------------------------- > This SF.net email is sponsored by the 2008 JavaOne(SM) Conference > Don't miss this year's exciting event. There's still time to save $100. > Use priority code J8TL2D2. > http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone > _______________________________________________ > enlightenment-users mailing list > enlightenment-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/enlightenment-users > -- Mike McNeil Sr. Network Engineer IST-IS University of California Berkeley Email: [EMAIL PROTECTED] ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
