Hi,
I just got some D2 devices returned to me. Unfortunately it seems like they have been used for some testing or whatsoever. I tried to access it via the console port to clear the config, but somehow I am not able to get any connection at all. Just went through the Installation Guide, reading: The �����232 console port uses a standard 8���pin RJ45 connector. An RJ45 to DB9 adapter is provided with the switch, but you must provide your own RJ45 to RJ45 straight���through console cable. Everything seems to be clear to me. Got the adapter, one straight-through cable, connected it to the laptop and nothing happens. First I thought of a broken device, but I tested four, all with the same result. Then I changed the adapter, still no connection. Even when I boot the D2 I do����t see any output at all. And I just know the password reset button. No config reset. Has anyone an idea how to deal with this? Any comment is appreciated Regards Tom -- Thomas Hofmann, System-/Networkadministrator, IT EB - Discover the Experience Visitors: Am Wolfsmantel 46, 91058 Erlangen, Germany Phone: +49 (9131) 7701 6969, mailto:[email protected] <mailto:[email protected]> Fax: +49 (9131) 7701 6333, http://www.elektrobit.com <http://www.elektrobit.com/> PGP-Key: http://keyserver.elektrobit.com <http://keyserver.elektrobit.com/> Elektrobit Automotive GmbH, Am Wolfsmantel 46, 91058 Erlangen, Germany Managing Director Otto F��ßel Register Court F��rth HRB 4886 ---------------------------------------------------------------- Please note: This e-mail may contain confidential information intended solely for the addressee. If you have received this e-mail in error, please do not disclose it to anyone, notify the sender promptly, and delete the message from your system. Thank you. --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
