Hi Thomas,
I'd want to confirm the adaptor and cable are ok, if possible, by
checking it against other Enterasys equipment.
I'd also want to confirm that, "Flowcontrol" on my serial settings was
set to, "None"
Hope this helps,
Simon Read
Enterasys Product Manager
*Duxbury Networking
*Specialist Networking Distributor/
/*tel:* +27 (0) 11 351 9800
*fax:* +27 (0) 11 646 7519
*cell:* +27 (0) 84 676 9200
*email:* [email protected] <mailto:[email protected]>
*web:* www.duxbury.co.za <http://www.duxbury.co.za/>
[email protected] wrote:
Hi,
I just got some D2 devices returned to me. Unfortunately it seems like
they have been used for some testing or whatsoever.
I tried to access it via the console port to clear the config, but
somehow I am not able to get any connection at all.
Just went through the Installation Guide, reading:
The RS���232 console port uses a standard�����pin RJ45 connector. An
RJ45 to DB9 adapter is provided
with the switch, but you must provide your own RJ45 to RJ45
straight���through console cable.
Everything seems to be clear to me. Got the adapter, one
straight-through cable, connected it to the laptop and nothing happens.
First I thought of a broken device, but I tested four, all with the
same result.
Then I changed the adapter, still no connection.
Even when I boot the D2 I don���t see any output at all.
And I just know the password reset button. No config reset.
Has anyone an idea how to deal with this?
Any comment is appreciated
Regards
Tom
--
Thomas Hofmann, System-/Networkadministrator, IT
*EB* - Discover the Experience
Visitors: Am Wolfsmantel 46, 91058 Erlangen, Germany
Phone: +49 (9131) 7701 6969, mailto:[email protected]
Fax: +49 (9131) 7701 6333, http://www.elektrobit.com
<http://www.elektrobit.com/>
PGP-Key: http://keyserver.elektrobit.com
<http://keyserver.elektrobit.com/>
Elektrobit Automotive GmbH, Am Wolfsmantel 46, 91058 Erlangen, Germany
Managing Director Otto �����el
Register Court��ürth HRB 4886
----------------------------------------------------------------
Please note: This e-mail may contain confidential information
intended solely for the addressee. If you have received this
e-mail in error, please do not disclose it to anyone, notify
the sender promptly, and delete the message from your system.
Thank you.
* --To unsubscribe from enterasys, send email to [email protected]
<mailto:[email protected]> with the body: unsubscribe enterasys
[email protected]
---
To unsubscribe from enterasys, send email to [email protected] with the body:
unsubscribe enterasys [email protected]
