Tibor Marcinek wrote:
>
> My first attempt to convey a signal from the camera body (EOS
> 500N) to the lense has failed. I connected each respective contact
> by a simple wire. The lamp test shown that connections had been
> established; however, the camera did not recognised the lense.
>
I don't have experience, but maybe it's a quite simple thing.
AFAIK, there is a switch inside the mount (on camera side) which
has to be pressed to make the camera try to talk to the lens.
You would have to make sure that your adaptor or whatever you use
to connect your reversed lens to the camera would press this switch.
Thomas Bantel
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
