> "Robert Meier" <[EMAIL PROTECTED]>
> Well, I think I was somewhat confused!! Anyway, what I
> wanted is to setup the Elan 7 so that I can choose the
> AF point with the QCD only so without pressing any
> additional button. A bonus would have been if there is
> a CF that allows you to switch AF fields only in
> horizontal direction, only in vertical direction, or
> all around. Unfortunately, this seems not to be
> possible. So I think I will chose CF11=1 and CF12=1.
Hi Robert,
The Elan 7E will let you choose AF points without
having to push a button using ECF.
On the Elan 7, CF11=2, the main dial selects AF points
horizontally while the QCD selects vertically.
Note that if you set your Elan 7 to CF11=1, CF12=1 you
will not be able to choose AUTO AF SELECT (7 points).
This seems to be a programmed limitation (i.e. BUG).
A more versatile setting appears to be CF11=1, CF12=0,
since you can select any of the AF points, including
AUTO AF SELECT. Choosing the centre AF point is at
most two presses on the UP arrow key.
Cheers
Julian Loke
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
