From: "Nick Young" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: 25 marca 2001 04:19
Subject: EOS Speedlite Transmitter ST-E2
> I am wondering if the ST-E2 would be a practical alternative to the
> combination of TTL Hot Shoe Adapter, Off-Camera Shoe Adapter and
> Connecting Cord.
I think so.
> I understand that both alternatives enable full ETTL functions with a
> 550EX and EOS3 - can anyone confirm if either or both enable full
> ETTL between a 550EX and EOS 30?
> The ST-E2 appears to be only slightly more expensive than the cord
> combination, but while the cord combination allows you to place the
> 550EX anywhere the cord will reach, I am concerned that the ST-E2
> will require that the 550EX is within 40 degrees of the camera's
> straight-ahead line. Would any user of the ST-E2 confirm that when
> it is mounted on the camera hot shoe, the IR beam emitter is fixed in
> position pointing forward?
Indoors position of the lamp and ST-E2 is not so important, it works
even if you put flash behind the camera (IR beam is bounced off the walls)
I have no experience outdoors.
Can the ST-E2 be rotated horizontally
> (like the flash head of a 550EX) so that the beam emitter points off
> to the side or back of the camera?
No, the posistion of ST-E2 is fixed.
Bye,
Rafal A. Walas
==================
[EMAIL PROTECTED]
[EMAIL PROTECTED]
tel: +48 601 083 450
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
