Help!! I'm currently using an EOS3 and 550EX speedlite, and am new to using Canon flashes. My problem is that whenever I use the flash, say on the P setting, using ETTL, I can only ever get a reading of 1/60th at F3.5 or 4, using a 28-105 USM. Whilst the exposures are correct, it's hardly very flexible. Additionally, if I use shutter priority, the camera will indicate under exposure when I try to set a faster shutter speed than 1/60th. When I use Aperture priority, the camera indicates the correct exposure for a non-flas shot. The camera/flash handbooks are of little use. If I set the shutter speed and apertures manually, will the flash give the correct exposure, and is there a way of using the auto modes on the camera to be more flexible when using flash?
Sorry if this sounds a really dumb question, but any help anyone can offer would be really appreciated. Kelyth * **** ******* *********************************************************** * For list instructions, including unsubscribe, see: * http://www.a1.nl/phomepag/markerink/eos_list.htm ***********************************************************
