The Elan 7 automatically adjusts the flash (built in or, I believe, a monted flash) for fill flash when the meter senses a certain amount of background brightness such that 'regular' flash would not be needed. My understanding is (correct me if I am wrong) that this 'feature' can not be disabled on the Elan 7. I am just curious then...what happens if you ad in FEC. Does it add or subtract from what it calculates to be the correct fill flash amount or from another calculated amount? What if you are doing macro work such that there is not a whole 'scene' from which to calculate background brightness, like if you were doing a flower close up and wanted to either fill in the shadows, or at the other extreme to add a large amount of flash, say through the bottom of the flower to achieve an effect? Is FEC there added or subtracted from a fill flash setting or from a full flas setting?
What has the experience been in these type of situautions as opposed to say an outdoor portrait? Any sort of guidelines for both types of situations would be appreciated. Thanks. Howard [EMAIL PROTECTED] * **** ******* *********************************************************** * For list instructions, including unsubscribe, see: * http://www.a1.nl/phomepag/markerink/eos_list.htm ***********************************************************
