----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
John, I ain't a mechanic but I'd note that John Wright, Sr., who IS a dedicated Coupe mechanic put a lot of effort into getting the wing removal inspection included as an option. He told me it lets him inspect the center section effectively and doesn't require cutting a bunch of holes in the plane. Ed Burkhead http://edburkhead.com/ [EMAIL PROTECTED] -----Original Message----- From: john jameson [mailto:[EMAIL PROTECTED] Sent: Friday, January 03, 2003 2:00 PM To: Ercoupe Hangar Flying Cc: [email protected] Subject: Fw: [COUPERS-TECH] Fw: coupe AD ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > hi everyone. could ed burkhead, and anyone else, give us their first > impression of the center section inspection AD and whether to go the wing > removal route or the inspection hole route. jm jameson > ----- Original Message ----- > From: "Ed Burkhead" <[EMAIL PROTECTED]> > To: "Coupe-List" <[email protected]>; "Coupe-Tech" <[email protected]> > Sent: Friday, January 03, 2003 9:35 AM > Subject: [COUPERS-TECH] Fw: coupe AD > > > > ----[Please read http://ercoupers.com/disclaimer.htm before following any > advice in this forum.]---- > > > > > > > > Could have been a lot worse. Twelve months to accomplish the initial > > inspection and a 3-year repetition rate is expensive, but tolerable. > > They've also seen the light and are allowing the wing removal method of > > inspection. > > > > > > > > Ed Burkhead > > http://edburkhead.com/ > > [EMAIL PROTECTED] > > > > -----Original Message----- > > From: Tom Laird-McConnell [mailto:[EMAIL PROTECTED] > > Sent: Friday, January 03, 2003 12:03 AM > > To: [email protected]; Flyin > > Subject: [COUPERS-TECH] Fw: coupe AD > > > > ----[Please read http://ercoupers.com/disclaimer.htm before following any > > advice in this forum.]---- > > > > > > > > ----- Original Message ----- > > From: "Darwin Girdauckis" <[EMAIL PROTECTED]> > > To: "Tom Laird-McConnell" <[EMAIL PROTECTED]> > > Sent: Thursday, January 02, 2003 9:21 PM > > Subject: coupe AD > > > > > > > Tom! > > > Found this on the Areo News Prop Wash tonight! > > > Looks like our concerns have have been met for the most part! > > > Darwin > > > 415c 85hp > > > CF-NTU > > > http://www.avantext.com/media/files/ADs/20022602.pdf > > > > > > ========================================================================== == > > == > > To leave this forum go to: http://ercoupers.com/lists.htm > > > > > > > > > ========================================================================== == > == > > To leave this forum go to: http://ercoupers.com/lists.htm > > > > > > > > > ========================================================================== == == To leave this forum go to: http://ercoupers.com/lists.htm ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
