----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
on 11/9/02 2:43 PM, Randy Helm at [EMAIL PROTECTED] wrote: > I have a 46 415C 85hp slick mags. > I need to know the gauge of wire for to replace the p lead (ignition to > mag). The current one is getting frayed. What gauge, type etc. > > Thanks, Randy > Yo, Randy Forney Drawing F-54048 (& electrical diagram) shows part numbers F-54048-25 & 26 of 16 ga. shielded wire for the P-Leads. See also diagram of Ercoupe Service Memo 23 revised 6-10-46 shows these as 415-54048-22 & 23. Both ends of shielding must be grounded. Hope this helps....sorry it took so long. Regards, William R. Bayne <____|(o)|____> (copyright 2002) ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm
<<attachment: winmail.dat>>
