----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
I don't know if my first message came threw. Take the wings off , they come off and go on VERY EASY Jim Phelps 2749H----- Original Message ----- From: "R M Finch" <[EMAIL PROTECTED]> To: "'Ercoupe Technical Discussion (moderated)'" <[email protected]> Sent: Friday, April 11, 2003 7:24 PM Subject: [COUPERS-TECH] Center Section AD: best way to comply? > ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- > > > There was some discussion a while ago about the best way to comply with > the new center section inspection AD: cut holes, remove wing, borescope. > > Hartmut and maybe others suggested removing the wings the first time, > thus allowing a thorough inspection and if you have to fix something > you'll need to remove the wings anyway. At the same time cut the holes > for future compliance. The borescope didn't seem likely as getting a > legal one was expensive. > > However, as more and more people perform the work to comply, I keep > hearing that pulling the wings is a real chore. So I'm wondering if I > want to do that at all. Maybe just cut the holes only? > > What do others think? > > Ralph Finch > > ========================================================================== == == > To leave this forum go to: http://ercoupers.com/lists.htm > Search the archives on http://escribe.com/aviation/coupers-tech/ > > > ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
