RE: [COUPERS-TECH] Center Section AD: best way to comply?

[Kevin Gassert]

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- He is correct. Must be installed per SB31 which requires backing plate and 3 screws. Get the AD and SB at www.univair.com     Kevin         -----Original Message----- From: R.J. Chevalier [mailto:[EMAIL PROTECTED] Sent: Wednesday, July 02, 2003 4:07 PM To: [EMAIL PROTECTED]; Tech@ercoupers.com   ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----     My IA tells me that the belly inspection holes cannot use the snap in plate like is used in the wing.  That it must be of the type that has a backing plate and is screwed on.  Is that right?  If not kindly cite your authority. Dick in NM     ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/         ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/