----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
At 11:52 AM 4/26/2004, Kevin Gassert wrote: >Looking at the picture, the Cleveland 10-35 does look like I remember mine. >It has a built in reservoir but I still have the firewall mounted reservoir >feeding it. Does the STC say to leave in the firewall reservoir? That's not the one. Yes, the old original looks much like one with a built-in reservoir. However the replacement looks very different. See http://www.aircraftspruce.com/catalog/lgpages/matco_mbrakecyl.php and look at the MC4. However, the part I received didn't have an external 'helper' spring, but neither did the ACS part a few catalogs ago. >I am able to pump up from the bottom OK until it hits the master cylinder. >It was >pumping up after I monkeyed with it but I think it is starting to drag >again. The cylinder may not be returning to the top as it should and there >is no external spring to help it. That sounds like the problem. If the pedal isn't all the way up, you can't pass through the MC. Greg ========================================================================== ==== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
<<attachment: winmail.dat>>
