----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Are you trying to say that you believe all of the parts you have on your A/C were built in the good old USA? DICK NANCY & SOPHIE -------Original Message------- From: [EMAIL PROTECTED] Date: 02/05/06 20:31:38 To: [email protected] Subject: Re: FW: [COUPERS-TECH] fuel pump In a message dated 2/5/2006 10:31:04 PM Eastern Standard Time, WRB writes: If one fails, you have over an hour to notice the cork wire heading down and find a good place to land. OK Bill, I'll quit challenging your "It's OK to use auto parts in the fuel pump" campaign if you will include in your campaign speech that if the Bought at Bubba's Auto Parts - Made in China" fuel pump diaphragm ruptures, and fuel drains into your crankcase, and your engine seizes or throws a rod, that you will have a lot less than an hour to find a landing spot. Fair enough? ;>) Oh yeah, you also have to include words to the effect that "the actuating arm and linkage parts have to be of identical dimensions and materials to the parts that are on the AC fuel pump that is specified for the particular engine." After all, we don't want anyone out there getting killed just because he/she wasn't quite enough of a materials scientist and fuel pump engineer to determine that the "Made in China" parts had some material or dimensional flaw that caused their pump to fail, right? I guess this horse just won't die, huh? Best Regards, Wayne DelRossi Alon N5618F ============================================================================= To leave this forum go to: http://ercoupers.com/lists.htm ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
