----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hey Larry: In addition to what Bill said, the propeller on the C-75-12 will
need to have the holes for the prop bolts relieved for bushings. Each bolt has a
bushing that fits into a recess in the rear face of the propeller.
One also needs to be careful about the amount of
torque that has been applied to the hub. It is a tapered fit, and held in place
with a pin. If too much torque is applied it can be cracked.
Lynn Nelsen
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
