Hey Dennis: I believe the new part for the control quadrant is just over 4
inches across at the wide point. However, I believe that it was/is permissible
to modify the part by making deeper and gentler grooves.
The front brace on the gascolator fitting goes to the front stud on the
#4 cylinder exhaust valve lifter/push rod tube adaptor (I can't for the life
of me come up with the correct name for it) and I do not have any pictures.
Lynn Nelsen
>>1) AD 54-26-02. My control quadrant (widest point where the cables
go over) is 3 3/16 inches wide. Can someone please tell me if this
is an old part or the new updated part PN 415-52137? If this is the
old part, the AD requires the cables to be removed for inspection
every 100 hours. With the new part the cables do not have to be
removed for inspection.
2) AD 2002-16-4. My gascolator (sediment bowl) now has a single 1/2
inch steel tube support from lower engine mount to an aluminum 45
degree pipe fitting into the gascolator and a tube to the rubber fuel
hose. Can someone please sent me a picture showing where a second
support tube would go?
Thanks again for all your help. Dennis<<
**************Start the year off right. Easy ways to stay in shape.
http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
