Thank you Richard, I did not know about that parameter. The debug information, however does not mention the block. It only gives me a few warnings of unconnected in-/outputs of other blocks, no errors whatsoever.
I am using Etherlab 1.3-pre 14-Sep-2010 Best Regards, Jasper Richard Hacker <[email protected]> schrieb: >Hello Jasper, > >click on the block to select it, then call >set_param(gcb,'debug','1') >from the matlab prompt and update your model. Check the debug >information of the slave to see whether your configuration worked. > >What version of etherlab are you using? > >- Richard > >Am 11/11/2013 09:42 AM, schrieb Jasper Westpfahl: >> Hello Etherlab users, >> >> I am trying to configure the EL6692 connector from a Simulink model >with >> a generic block and a device description xml to transmit various data >> between two masters. Neither Simulink nor dmesg throw any errors, but >> the RxPdo that are supposed to be configured do not show up on >'ethercat >> pdo -p 9' . The TxPdo do, with the exception of the last 'stuffing' >byte >> (for alignment), show up. I have attached the xml and the output of >> 'ethercat pdo -p 9' in the hope that someone can have a quick look >and >> give me a pointer. I would appreciate it. Thanks. >> >> Best regards, >> Jasper Westpfahl >> >> >> # ethercat pdo -p 9 >> >> SM0: PhysAddr 0x1000, DefaultSize 256, ControlRegister 0x26, Enable 1 >> SM1: PhysAddr 0x1100, DefaultSize 256, ControlRegister 0x22, Enable 1 >> SM2: PhysAddr 0x1200, DefaultSize 0, ControlRegister 0x24, Enable 1 >> RxPDO 0x1600 "RxPDO-Map" >> SM3: PhysAddr 0x1800, DefaultSize 20, ControlRegister 0x20, Enable 1 >> TxPDO 0x1a03 "" >> PDO entry 0x10f4:02, 2 bit, "" >> PDO entry 0x0000:00, 6 bit, "" >> PDO entry 0x0000:00, 3 bit, "" >> PDO entry 0x1800:09, 1 bit, "" >> PDO entry 0x1800:07, 1 bit, "" >> PDO entry 0x10f4:0e, 1 bit, "" >> PDO entry 0x10f4:0f, 1 bit, "" >> PDO entry 0x10f4:0a, 1 bit, "" >> PDO entry 0x10f4:0b, 32 bit, "" >> PDO entry 0x10f4:0c, 32 bit, "" >> PDO entry 0x10f4:0d, 32 bit, "" >> TxPDO 0x1a00 "TxPDO-Map" >> PDO entry 0x6000:01, 32 bit, "" >> PDO entry 0x6000:02, 32 bit, "" >> PDO entry 0x6000:03, 64 bit, "" >> PDO entry 0x6000:04, 64 bit, "" >> PDO entry 0x6000:05, 64 bit, "" >> PDO entry 0x6000:06, 64 bit, "" >> PDO entry 0x6000:07, 64 bit, "" >> PDO entry 0x6000:08, 64 bit, "" >> PDO entry 0x6000:09, 1 bit, "" >> PDO entry 0x6000:0a, 1 bit, "" >> PDO entry 0x0000:00, 6 bit, "" >> >> >> _______________________________________________ >> etherlab-users mailing list >> [email protected] >> http://lists.etherlab.org/mailman/listinfo/etherlab-users >> > >Mit freundlichem Gruß > >Richard Hacker > >-- >------------------------------------------------------------------------ > >Richard Hacker M.Sc. >[email protected] >Tel.: +49 201 / 36014-16 > >Ingenieurgemeinschaft IgH >Gesellschaft für Ingenieurleistungen mbH >Heinz-Bäcker-Str. 34 >D-45356 Essen > >Amtsgericht Essen HRB 11500 >USt-Id.-Nr.: DE 174 626 722 >Geschäftsführung: >- Dr.-Ing. T. Finke, >- Dr.-Ing. W. Hagemeister >Tel.: +49 201 / 360-14-0 >http://www.igh-essen.com > >------------------------------------------------------------------------ >_______________________________________________ >etherlab-users mailing list >[email protected] >http://lists.etherlab.org/mailman/listinfo/etherlab-users
_______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
