Hi Jerry, for the vehicle side of J1772 I recommend David Kerzel and his Modular EV Power see his web site for all the particulars, pictures and such www.modularevpower.com I have seen and touched his products and they are professionally constructed. One of his adapters from the car connector for J1772 to a "Dryer Outlet" may be the simplest for you to connect. one problem you may have is that the J1772 protocall does not include the "Neutral" so you cannot just use a 120 V product . an auto-transformer with a single center tapped winding for 120 ct 120 may be suitable if rate for your full load current . otherwise you must only use chargers suitable for a 240 Vac input. David Kerzel is located in Pompano Beach so its not as far away as Jacksonville... My phone is still 863-944-9913 if you need to talk or e-mail me direct at [email protected]
On Fri, Mar 22, 2013 at 9:51 PM, jerry freedomev <[email protected]>wrote: > Hi Bruce and All, > > I'm going to need to use the public > charge stations soon for fast charging. They are well spread now in > central Fla, at least from St Pete to Jacksonville on I-4 and I-95 but > many don't have 120vac. So I've come up to the one thing I can't make > cheaply, the EV side of a J1772 . > > So what do I need and where is a > good/best place to get it as low cost as possible? > > I've been happy with 120vac for > my very lightweight EV's around town but now I want to travel long distance > and keep charging to 85% flooded lead in around 30 minutes to an hour. > Since the normal 70% charge from 15% is only 3-4kwhr it shouldn't be too > hard. I have 1 2kw unit now plus a 1kw regulated and will add another > 2-3kw later. > > Trying to do this and keep the > weight, cost down, the Streamliner only weighs 700lbs or so, isn't easy so > likely do non isolated ones next just using inductors instead of > transformers. > > > Thanks, > > > Jerry Dycus > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130322/2df145d4/attachment.htm > > > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > For EV drag racing discussion, please use NEDRA ( > http://groups.yahoo.com/group/NEDRA) > > -- Regards, * Dennis *(EVprofessor)* Miles* *(863)944-9913* (phone noon to midnight E.S.T.) * reply to [email protected]* -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130326/d3f8363a/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
