Lee wrote - > > I think the ideal solution is to weld your wires directly to the battery; no > post or terminal at all. I *have* successfully dunked the wire or battery bus > bar in a solder pot, then welded it to a battery post (just heat until they flow > together). My connections looked ugly, but never failed again. > > -- > Ingenuity gets you through times of no money better than money > will get you through times of no ingenuity. -- Terry Pratchett > -- > Lee A. Hart, http://www.sunrise-ev.com/LeesEVs.htm
Very nice, I like that idea, no retorking, might be problematic if batteries need to be switched out. Since the connection is pretty permanent, maybe you would take better care of the batteries. I guess the vibration problem would be the same as a mechanical connection. Rush www.TucsonEV.com _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
