But it isn't correct! Look at the diagram, it clearly shows the switch (S3) is normally open. As it is drawn, the resistance would be 480ohm (R6+R7), and would drop to 150ohm (cause S3 shorts over R7) when the button is pressed. This does not reflect the reality of the situation, which is that there is 150ohm, and it increases to 480ohm when the button is pressed.
S3 should be drawn normally closed on the schematic. david. ----- Original Message ----- > From: corbin dunn <[email protected]> > To: Electric Vehicle Discussion List <[email protected]> > Cc: > Sent: Wednesday, May 8, 2013 4:23 PM > Subject: Re: [EVDL] J1772 proximity stuff > >T he Wikipedia wiki should be right: > > http://en.wikipedia.org/wiki/SAE_J1772 > > corbin > _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
