I'm hooking the four battery modules in the back to the 3 in the front (modules
next to each other are connected by busbar, and on to the controller, etc, and
have some fat cable (over 1/2 in. to outside the rubber outer, probably a full
half, maybe 9/16 for the copper) onto which I have to crimp the ample
connectors I've bought to make the connections. I can't find a crimping tool
bigger than single O size at places like Harbor Freight or Home Depot. HAS
ANYONE found a supplier for a simple one-- not the big hydraulic type, but one
like a really big bold cutter, with (probably) interchangeable dies? AND- if
anyone has one not in regular use that I could borrow, that's within a 50 mile
drive of Washington DC (where I am) and Boston (where the car project is), let
me know!
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20131007/d29b1713/attachment.htm>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA
(http://groups.yahoo.com/group/NEDRA)
