Bob Batson up at EV America in Wolfeboro, NH has one you can rent. I think it's like $30/week...or month...or something. They ship it to you. That's what I did. Nice hex crimper. They even included a cable cutter.
Cheers! -Ben On Oct 7, 2013, at 5:49 PM, L. Chris Hager wrote: > I'm hooking the four battery modules in the back to the 3 in the front > (modules next to each other are connected by busbar, and on to the > controller, etc, and have some fat cable (over 1/2 in. to outside the rubber > outer, probably a full half, maybe 9/16 for the copper) onto which I have to > crimp the ample connectors I've bought to make the connections. I can't find > a crimping tool bigger than single O size at places like Harbor Freight or > Home Depot. HAS ANYONE found a supplier for a simple one-- not the big > hydraulic type, but one like a really big bold cutter, with (probably) > interchangeable dies? AND- if anyone has one not in regular use that I > could borrow, that's within a 50 mile drive of Washington DC (where I am) and > Boston (where the car project is), let me know! > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20131007/d29b1713/attachment.htm> > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > For EV drag racing discussion, please use NEDRA > (http://groups.yahoo.com/group/NEDRA) > _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
