Good afternoon Nathan, That is not exactly true. I am running a 200v system and works very well. Al www.evalbum.com/2430
----- Original Message ----- From: "Nathan Loofbourrow" <[email protected]> To: "Electric Vehicle Discussion List" <[email protected]> Sent: Thursday, November 14, 2013 10:48:37 AM Subject: Re: [EVDL] Azure DMOC Not spinning motor. I had this exact problem and discovered that the controller was programmed at the factory with a 250V minimum voltage. Use the software to lower that for your 164V pack and see if that solves it. (That said, the only folks on evalbum that seem pleased with their Azure setups seem to be those running at 250V+.) n _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20131114/9f9cc773/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
