Could also use the solder method. I just happen to have some Tinning Butter made by Eastwood.com on my bench in front of me. It is use for tinning metals for applying lead to metals or I use it to build up some battery posts.
Very time consuming if you have a lot of links like I am planning on my next battery pack which will be over 240 links to do. The silver epoxy paint which needs no primer, works very good which I have use before. Tape about 25 or more bars together and either spray the ends or dip them. Cold galvanize paints works good which we are required to use on electrical conduits install outside that may have be scratch off while being install. Roland ----- Original Message ----- From: EVDL Administrator via EV<mailto:ev@lists.evdl.org> To: Electric Vehicle Discussion List<mailto:ev@lists.evdl.org> Sent: Monday, September 22, 2014 1:06 PM Subject: Re: [EVDL] Dissimilar metals on Headyways? On 22 Sep 2014 at 7:55, Roland via EV wrote: > You can get the plated copper bus bars in long lengths and cut them to size. > You will note that the cut ends will show copper. In wet locations, coat > these cut ends with silver paint or epoxy silver paint. Why not tin them with solder? I would think that that would bond and protect better. David Roden - Akron, Ohio, USA EVDL Administrator = = = = = = = = = = = = = = = = = = = = = = = = = = = = = EVDL Information: http://www.evdl.org/help/<http://www.evdl.org/help/> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Note: mail sent to "evpost" and "etpost" addresses will not reach me. To send a private message, please obtain my email address from the webpage http://www.evdl.org/help/<http://www.evdl.org/help/> . = = = = = = = = = = = = = = = = = = = = = = = = = = = = = _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub<http://www.evdl.org/help/index.html#usub> http://lists.evdl.org/listinfo.cgi/ev-evdl.org<http://lists.evdl.org/listinfo.cgi/ev-evdl.org> For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA<http://groups.yahoo.com/group/NEDRA>) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20140922/0f5934bc/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)