http://www.digikey.com/catalog/en/partgroup/thermal-grease-and-compounds/1206
Sent from my iPhone > On Feb 25, 2017, at 9:29 PM, Jay Summet via EV <ev@lists.evdl.org> wrote: > > I'm working on replacing the diodes and MOSFETS in a Curtis 1231c, and need > an electrically and thermally conductive heat transfer compound to put > between the MOSFET's/Diodes and the heatsync they attach to. > > They are mechanically attached with screws, so I think a grease would be fine > and I don't need an adhesive. > > It's an aluminum heatsync if that matters. > > Suggestions I could source from digikey preferred. > > Also, I need to mechanically stabalize my capacitors. I'm thinking of using a > high temp silicon, as what was on the pre-existing capacitors looks a lot > like cured silicon, but if you have any suggestions for stabilization/potting > I'm interested in hearing options. > > Thanks, > Jay > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > Read EVAngel's EV News at http://evdl.org/evln/ > Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA) > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20170226/d392ca5a/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org Read EVAngel's EV News at http://evdl.org/evln/ Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
