I have MANDRAKE 7.0, Kernel 2.2.14-15mdk installed.
Everything works EXCEPT .......my HP 7200e (that;'s external)
I've tried it, it does not work. Only my scsi cdrom responds.
Here's my story ......
Internal hardware:
hda: Maxtor 91360D9, ATA DISK drive
hdb: WDC AC33100H, ATA DISK drive
hdc: LS-120 CSMO 05 UHD Floppy, ATAPI FLOPPY drive
I have internal SCSI installed
scsi id 5 PLEXTOR CD-ROM PX-32TS - This is my primary CDROM
scsi id 6 IBM DCAS-34330W - This is my primary HARDDRIVE (2 parts -
sda1, sda5)
parport is installed. I have an external HP 694C printer on the end of
my
parallel port chain.
My HP 7200e is in between the computer and printer.
I can not get my computer to recognize my cdrw.
I've tried "mount -t iso9660 /dev/scd0 /mnt/cdrw"
And it only re-mounts my primary cdrom, which of course is now mounted
twice.
(Actually, I tried everything I've read and more than I wanted too.)
I keep thinking that if the CDRW requires ide-scsi support, I should try
and make my scsi adapter see it, to define an ID for it.
HELP !! I CAN NOT GET THIS TO WORK, and I'll bet it's something
SO SIMPLY !!
Included with this request for HELP is a copy of my dmesg and fstab
file.
Thanks for creative suggestions.
BTY - I've read all the documentation and ton's of newsgroup postings,
NOTHING has helped so far.
***********************************************************************
dmesg output
***********************************************************************
Linux version 2.2.14-15mdk ([EMAIL PROTECTED]) (gcc version
2.95.2 19991024 (release)) #1 Tue Jan 4 22:24:20 CET 2000
relocating initrd image:
initrd_start:0xc0fa5000 initrd_end:0xc0fff270
mem_start:0xc026d000 mem_end:0xcfff0000
initrd_size:0x0005a270 dest:0xcff95000
Detected 348489026 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 347.34 BogoMIPS
Memory: 257252k/262080k available (1092k kernel code, 416k reserved,
2892k data, 64k init, 0k bigmem)
Dentry hash table entries: 262144 (order 9, 2048k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium II (Deschutes) stepping 01
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xfd993
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Enabling I/O for device 00:60
PCI: Enabling I/O for device 00:70
PCI: Enabling memory for device 00:70
PCI: Enabling I/O for device 00:78
PCI: Enabling memory for device 00:78
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:pio, hdd:pio
hd0: C/H/S=27625/247/228 from BIOS ignored
hda: Maxtor 91360D8, ATA DISK drive
hdb: WDC AC33100H, ATA DISK drive
hdc: LS-120 CSMO 05 UHD Floppy, ATAPI FLOPPY drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: Maxtor 91360D8, 12970MB w/256kB Cache, CHS=26353/16/63
hdb: WDC AC33100H, 3020MB w/128kB Cache, CHS=1024/255/63
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 768.477 MB/sec
p5_mmx : 803.910 MB/sec
8regs : 622.935 MB/sec
32regs : 328.041 MB/sec
using fastest function: p5_mmx (803.910 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: [PTBL] [1653/255/63] hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11 hdb12 hdb13 >
RAMDISK: Compressed image found at block 0
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem).
(scsi0) <Adaptec AHA-294X Ultra SCSI host adapter> found at PCI 13/0
(scsi0) Wide Channel, SCSI ID=7, 16/255 SCBs
(scsi0) Warning - detected auto-termination
(scsi0) Please verify driver detected settings are correct.
(scsi0) If not, then please properly set the device termination
(scsi0) in the Adaptec SCSI BIOS by hitting CTRL-A when prompted
(scsi0) during machine bootup.
(scsi0) Cables present (Int-50 YES, Int-68 YES, Ext-68 NO)
(scsi0) Downloading sequencer code... 413 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.21/3.2.4
<Adaptec AHA-294X Ultra SCSI host adapter>
scsi : 1 host.
(scsi0:0:5:0) Synchronous at 20.0 Mbyte/sec, offset 15.
Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0
(scsi0:0:6:0) Synchronous at 40.0 Mbyte/sec, offset 8.
Vendor: IBM Model: DCAS-34330W Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 6, lun 0
Uniform CDROM driver Revision: 2.56
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8467200 [4134 MB] [4.1
GB]
sda: sda1 sda2 < sda5 >
tulip.c:v0.91g-ppc 7/16/99 [EMAIL PROTECTED]
eth0: Lite-On 82c168 PNIC rev 32 at 0x1800, 00:A0:CC:57:0D:AD, IRQ 11.
eth0: MII transceiver #1 config 3000 status 7829 advertising 01e1.
eth1: Lite-On 82c168 PNIC rev 33 at 0x2000, 00:A0:CC:3E:24:6F, IRQ 10.
eth1: MII transceiver #1 config 1000 status 782d advertising 01e1.
autodetecting RAID arrays
autorun ...
... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 64k freed
Adding Swap: 133016k swap-space (priority -1)
es1371: version v0.19 time 22:34:23 Jan 4 2000
es1371: found adapter at io 0x1040 irq 11
es1371: features: joystick 0x0
es1371: codec vendor CRY revision 3
es1371: codec features Headphone out 18bit DAC 18bit ADC
es1371: stereo enhancement: no 3D stereo enhancement
cdrom: open failed.
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device fd(2,0)
[MS-DOS FS Rel. 12,FAT 0,check=n,conv=b,uid=0,gid=0,umask=022,bmap]
[me=0xfe,cs=0,#f=0,fs=1810,fl=144680,ds=1810,de=0,data=1810,se=28672,ts=940114177,ls=5120,rc=0,fc=4294967295]
Transaction block size = 512
VFS: Can't find a valid MSDOS filesystem on dev 02:00.
parport0: PC-style at 0x378 [SPP,PS2,EPP]
parport0: Printer, HEWLETT-PACKARD DESKJET 690C
lp0: using parport0 (polling).
***********************************************************************
FSTAB file
***********************************************************************
none /proc proc defaults 0 0
none /dev/pts devpts mode=0620 0 0
/dev/hda1 /mnt/DOS_hda1 vfat user,exec,conv=auto 0 0
/dev/hda5 /mnt/DOS_hda5 vfat user,exec,conv=auto 0 0
/dev/hda6 /mnt/DOS_hda6 vfat user,exec,conv=auto 0 0
/dev/hda7 /mnt/DOS_hda7 vfat user,exec,conv=auto 0 0
/dev/hda8 /mnt/DOS_hda8 vfat user,exec,conv=auto 0 0
/dev/hda9 /mnt/DOS_hda9 vfat user,exec,conv=auto 0 0
/dev/hdb1 /boot ext2 defaults 1 2
/dev/hdb5 /usr ext2 defaults 1 2
/dev/hdb6 /usr/local ext2 defaults 1 2
/dev/hdb7 /home ext2 defaults 1 2
/dev/hdb8 /usr/src ext2 defaults 1 2
/dev/hdb9 swap_upgrade swap defaults 0 0
/dev/hdb10 /var ext2 defaults 1 2
/dev/hdb11 /tmp ext2 defaults 1 2
/dev/hdb12 /opt ext2 defaults 1 2
/dev/hdb13 / ext2 defaults 1 1
/dev/hdc /mnt/ls120 vfat user,exec,nodev,nosuid,rw,noauto 0 0
/dev/sda1 /mnt/DOS_sda1 vfat user,exec,conv=auto 0 0
/dev/sda5 /mnt/DOS_sda5 vfat user,exec,conv=auto 0 0
/mnt/floppy /mnt/floppy supermount fs=vfat,dev=/dev/fd0 0 0
/mnt/cdrom /mnt/cdrom supermount fs=iso9660,dev=/dev/cdrom 0 0
