I have an adaptec AHA1505 ISA scsi card and S&F 4x CDRW. I also have Yamaha OPL-SAx ISA sound card. A while ago, I too had similar problem with my CD burner. It turned out that both the ISA cards were using same IRQ and IO addresses were messed up. Also if I enabled sound or started any sound program my system used to freeze and I had to press RESET button. I solved the problem with doing the isapnp configuration by hand. Now both the cards are happy and I've had no problems. Hope that helps. ----Original Message Follows---- From: Roger Sherman <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] To: Expert List <[EMAIL PROTECTED]> Subject: [expert] re: cdrecord (Hey Tom) Date: Sun, 17 Dec 2000 07:42:34 -0500 (EST) Tom, sorry to call you out personally, just wanted to let you know I figured out the dev= portion of the equation. OK, this is for the group... When I tried to use cdrecord, the following was the output. Does this tell anyone anything? Last chance to quit, starting real write in 1 seconds. Waiting for reader process to fill input buffer ... input buffer ready. cdrecord: Warning: controller returns wrong size for CD write parameter page. Performing OPC... cdrecord: Warning: controller returns wrong size for CD write parameter page. Starting new track at sector: 0 Track 01: 0 of 4 MB written.cdrecord: Input/output error. write_g1: scsi sen dcmd: retryable error CDB: 2A 00 00 00 00 00 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0 Sense flags: Blk 0 (not valid) write track data: error after 0 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 Writing time: 5.030s Fixating... cdrecord: Input/output error. close track/session: scsi sendcmd: retryable error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 04 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 480s Fixating time: 0.005s cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable error CDB: 55 10 00 00 00 00 00 00 10 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 40s cdrecord: fifo had 64 puts and 1 gets. cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. peace, Rog http://www.slammingrooves.com Registered Linux user #190719 Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list. _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com
Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
