On Sat, 20 Jan 2001 11:31:51 -0500, Andy wrote:
>
>setserial /dev/ttyS2 irq 9 port 0xdc00 autoconfig
>
>setserial /dev/ttyS2 irq 9 port 0xdc00 ^fourport ^auto_irq skip_test
>autoconfig spd_vhi
>
>Neither setserial commands work. Also, the IRQ appears to be unused by any
>other device. Can anyone point me in the right direction? Thxs.
>
>Andy Judge
---------------------------------
Sat, 20 Jan 2001 17:21:45
Run a cat /proc/interrupts and look for conflicts
Run procinfo
Run setserial -g /dev/ttyS* that is a capital s....
My particular anomaly turned out to be a IRQ share with a USB hub that
killed the modem...even though the hub was deactivated in BIOS......
The drake thing was of no use..it called my modem a winmodem
and claimed it couldn't configure it....was a lie...the modem works
fine now.....
my setserial line is somewhat different than yours ..mine is
setserial /dev/ttyS3 uart 16550A port 0xa400 irq 4
I don't have any ,no test or anything in there, you might try subbing
in your irq and adr and trying this format?you dont seem to have the
uart 16550A in yours?
my modem is a ZT 2920 but the procedure should be the same?
Olly P
Biloxi
