----- Mensaje Original ----- Remitente: Olly P <[EMAIL PROTECTED]> Fecha: Jueves, Abril 4, 2002 7:15 pm Asunto: Re: [expert] Problem with LM82 and modem
> On Thursday 04 April 2002 13:44, �scar. typed: > > Hi all, > > > > I have LM8.2 installed in several PCs and is working ok. > > But this afternoon I have installed it in a friend's computer. > > He cannot connect to internet (using kppp) > > The modem is a Conceptronic 56ET > > This is what I get if I run pppd from a console: > > [root@localhost ppp]# pppd > > ~�}#�!}!}!} }4}"}&} } } } }%}&v��}'}"}(}"}*y~~�}#�!}!}!} }4}"}&} > } } > clip...this is working fine > > > And these messages are in /var/log/messages: > > Apr 4 18:51:31 localhost pppd[2876]: pppd 2.4.1 started by > root, uid > > 0 Apr 4 18:51:31 localhost pppd[2876]: Using interface ppp0 > > Apr 4 18:51:32 localhost pppd[2876]: Connect: ppp0 <--> /dev/pts/2 > > Apr 4 18:51:33 localhost /etc/hotplug/net.agent: assuming ppp0 is > > already up > > Apr 4 18:52:02 localhost pppd[2876]: LCP: timeout sending > > Config-Requests > > Apr 4 18:52:02 localhost pppd[2876]: Connection terminated. > > Apr 4 18:52:02 localhost pppd[2876]: Receive serial link is not > > 8-bit clean: > > Apr 4 18:52:02 localhost pppd[2876]: Problem: all had bit 7 set > to 0 > > Apr 4 18:52:02 localhost pppd[2876]: Exit. > > > ----------------------------- > Thursday 04 April 2002 -- 12:01hrs cst > I had this same problem last year �scar ..the PPPD and the modem > is > working...the trouble is with authenication with the ISP...look to > etc/ppp/options > /etc/ppp/chap-secrets > > or pap if you use that > > The modem is timing out while waiting for the authentication to > get > it's act together. > > luck with it. Thank you for your answer. But I'm afraid that this is not the problem. In fact, the modem is *not* dialing. I believe that the problem is in the modem initialisation. If I activate the log viewer in kppp I can observe that it does not show the "ATZ - OK" which I used to see. Instead, the inferior displacement bar shows like the first line of log has filled of a series of "invisible" characters. If I run a terminal with the modem, I must write two times AT <intro> to get a OK. And ATI 1 show a long line, with the correct string at the end of a series of "invisible" characters. Any idea? Thanks, oscar.
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
