You don't need one that support bonjour....you just need an Ethernet card for the printer. It needs to be able to connect to Ethernet and obtain an ip address or be assigned an ip address that is in the range of your network.
Sent from my iSomething -- Eric Dannewitz Musician/Polymath/Evil Genius http://www.ericdannewitz.com/ iMessage [email protected] On Nov 17, 2011, at 11:05 PM, Johannes Gebauer <[email protected]> wrote: > Hi David, > > How did your computer talk to your printer in 10.6? AppleTalk? That is > no longer supported in 10.7. > > It is a while ago that I went through some of this, but I believe there > are JetDirect Cards which support Bonjour, and JetDirect Cards which > don't. They are cheap on ebay, so that might be an option. > > My HP5000 is definitely seen through Bonjour (I can see it in Safari) > although it does take a while until it shows up. > > I can enter the web setup through Safari, and set addresses etc., but > the computer doesn't need any of this, it can talk to it through Bonjour. > > Hope that helps, > Johannes > > Here is the Jet Direct Data: > > HP JetDirect: J4169A > Firmware Version: L.25.57 > IP Address 192.168.178.26 > Hardware Address: 0001E659C375 > LAA: 0001E659C375 > Admin Password: <Not Set> > > _______________________________________________ > Finale mailing list > [email protected] > http://lists.shsu.edu/mailman/listinfo/finale _______________________________________________ Finale mailing list [email protected] http://lists.shsu.edu/mailman/listinfo/finale
