Yes, if you only need to go up to 11x17, you have lots of options. The printers I looked at had to go to 12x18 and 13x20 would have been beter.
On Sun, Apr 29, 2018 at 8:32 AM, David H. Bailey <dhbaile...@comcast.net> wrote: > On 4/29/2018 8:20 AM, Robert Patterson wrote: > >> If you are offset-printing books, 600dpi is probably not good enough. But >> I >> never print books. Any printer that would offset books from my work almost >> certainly would do it from a PDF. FWIW: the only situation I can spot the >> difference is on hairpins. >> >> I did not consider ink jet printers. They are far too slow. There is a >> Brother inkjet that will actually feed 13" wide sheets, but each page >> takes >> several minutes. >> >> > My Epson WorkForce WF-7620 doesn't take that long. It's an inkjet printer > which printes beautiful output, it can handle 11x17 paper with no problems, > it duplexes automatically, it scans up to tabloid size. And it's only > around $200 if you're lucky enough to find it on sale at Staples or Office > Depot. I've been using mine for 3 years now and it's great. Advances in > ink technology have helped a lot -- once dry the ink won't run if a few > water drops get on it and get wiped off. > > > -- > ***** > David H. Bailey > dhbaile...@comcast.net > http://www.davidbaileymusicstudio.com > _______________________________________________ Finale mailing list Finale@shsu.edu https://lists.shsu.edu/mailman/listinfo/finale To unsubscribe from finale send a message to: finale-unsubscr...@shsu.edu
